Premium Information is available for this item - Upgrade for $1 a day
3120-01-335-7175
Sleeve Bearing
3120013357175 013357175 KRJ6UDSB-011S 04A076-06C011 AHJF06C(L1)011 KDJ06C011-342 07-282-06-011 AHJF06C011
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
8
Marketplace 3120-01-335-7175
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-335-7175 5+ Documents (More...)
/fsg-31/fsc-3120/us
https//www.nsnlookup.com /cage Sargent Aerospace & Defense, Llc (CAGE Code 97613) Apr 1991 3120-01-335-7175
7176 https//www.nsnlookup.com /cage New Hampshire Ball Bearings Inc (CAGE Code 15860) Apr 1991 3120-01-335-7175
Sleeve Bearing 3120013357175 013357175 More... ) https//www.nsnlookup.com /cage Rbc Transport Dynamics
Restrictions 3120-01-335-7175
3120-01-335-7175 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-335-7175
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-335-7175
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-335-7175
- Part Number
- Manufacturer
- Status
- KRJ6UDSB-011S
- Manufacturer
- 50632 - Kamatics Corporation (Active)
- Primary Buy
- Primary Buy
- 04A076-06C011
- 1W025 - Northrop Grumman Systems Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AHJF06C(L1)011
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- KDJ06C011-342
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 07-282-06-011
- 09455 - Rbc Transport Dynamics Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AHJF06C011
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-335-7175
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.3755 Inches Minimum And 0.3765 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.5007 Inches Minimum And 0.5012 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Corner Shape [BZLX]
- Undercut Left Flange Body Corner
- Flange Outside Diameter [AEPR]
- 0.8550 Inches Minimum
- Flange Width [AGFF]
- 0.0575 Inches Minimum And 0.0625 Inches Maximum
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Material [MATT]
- Steel Comp 630 Outer Layer
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std Single Material Response Outer Layer
- Overall Length [ABHP]
- 0.3905 Inches Minimum And 0.4055 Inches Maximum
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
Weapon Systems (WSDC) 3120-01-335-7175
DLA Procurement Analysis 3120-01-335-7175
Management Data 3120-01-335-7175
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-335-7175
Freight Information 3120-01-335-7175
3120-01-335-7175 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-335-7175 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-335-7175 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-335-7175 is not classified as a special type of cargo when transported by water. 3120-01-335-7175 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-335-7175
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3120-01-335-7175 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: