Premium Information is available for this item - Upgrade for $1 a day
3120-01-325-1392
Sleeve Bushing
3120013251392 013251392 129-B144
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
May 2023
2
Marketplace 3120-01-325-1392
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-325-1392 3+ Documents (More...)
Restrictions 3120-01-325-1392
3120-01-325-1392 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-325-1392
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-325-1392
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-325-1392
- Part Number
- Manufacturer
- Status
- 129-B144
- Manufacturer
- 4Z321 - Schenck Usa Corp (Active)
- Primary Buy
- Primary Buy
- 129-B144
- 58016 - Test Devices Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-325-1392
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Antirotation/Lubrication Type And Quantity [CTJM]
- 8 Hole
- Body Inside Diameter [ADAS]
- 1.5000 Inches Nominal
- Body Outside Diameter [ADAR]
- 1.7510 Inches Minimum And 1.7514 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Flange Outside Diameter [AEPR]
- 2.0000 Inches Nominal
- Flange Width [AGFF]
- 0.1050 Inches Minimum And 0.1100 Inches Maximum
- Hole Diameter [AAUB]
- 0.1870 Inches Nominal First
- Material [MATT]
- Copper Alloy 841 Overall
- Material Document And Classification [MDCL]
- Ams B438 Assn Std Single Material Response Overall
- Right Internal Flange Hole Diameter [AGFJ]
- 1.7534 Inches Minimum And 1.7536 Inches Maximum
- Right Internal Flange Width [AGFL]
- 0.5100 Inches Minimum And 0.5200 Inches Maximum
- Overall Length [ABHP]
- 1.1060 Inches Nominal
- Special Features [FEAT]
- Holes Are Equally Spaced On 1.250 In. Bolt Circle
- Style Designator [STYL]
- Solid, External Flange One End, Internal Flange One End
DLA Procurement Analysis 3120-01-325-1392
Management Data 3120-01-325-1392
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-325-1392
Freight Information 3120-01-325-1392
3120-01-325-1392 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-01-325-1392 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-01-325-1392 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-325-1392 is not classified as a special type of cargo when transported by water. 3120-01-325-1392 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-325-1392 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: