Premium Information is available for this item - Upgrade for $1 a day
3120-01-185-2888
Sleeve Bushing
3120011852888 011852888 4M279-09001 10108213
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
November 2023
12
Marketplace 3120-01-185-2888
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-185-2888 2+ Documents (More...)
/fsg-31/fsc-3120/us
Restrictions 3120-01-185-2888
3120-01-185-2888 is a Sleeve Bushing that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-185-2888
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-185-2888
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Mar 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3120-01-185-2888
- Part Number
- Manufacturer
- Status
- 4M279-09001
- Manufacturer
- 76301 - The Boeing Company (Active)
- Source Control
- Source Control
- 4M279-09001
- 65910 - Mayday Manufacturing Co. (Active)
- Primary Buy
- Primary Buy
- 4M279-09001
- 70265 - All Power Manufacturing Co. (Active)
- Primary Buy
- Primary Buy
- 4M279-09001
- 61641 - Special Parts Manufacturing, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4M279-09001
- 23294 - Avalon Machine Products Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10108213
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 3120-01-185-2888
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.5330 Inches Minimum And 0.5340 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.6855 Inches Minimum And 0.6865 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Flange Outside Diameter [AEPR]
- 0.8020 Inches Minimum And 0.8220 Inches Maximum
- Flange Width [AGFF]
- 0.0600 Inches Minimum And 0.0620 Inches Maximum
- Material Document And Classification [MDCL]
- Qq-C-530,Alloy C173,Cond H Fed Spec Single Material Response Overall
- Material [MATT]
- Copper Alloy 173 Overall
- Overall Length [ABHP]
- 0.4450 Inches Minimum And 0.4520 Inches Maximum
- Special Features [FEAT]
- Flange End Counterbore 0.5510 In. Min,0.5550 In. Max Dia,0.0600 In. Min 0.0620 In. Max Deep
- Specification/Standard Data [ZZZK]
- 76301-4-279 Manufacturers Standard
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Left End Surface Of Body And Flange
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Outside Diameter Surface Of Flange
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Outside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Right End Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 2 Fed Spec Single Treatment Response Right End Surface Of Left Flange
- Surface Treatment [SFTT]
- Cadmium Left End Surface Of Body And Flange And Chromate Left End Surface Of Body And Flange
- Surface Treatment [SFTT]
- Cadmium Outside Diameter Surface Of Body And Chromate Outside Diameter Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Outside Diameter Surface Of Flange And Chromate Outside Diameter Surface Of Flange
- Surface Treatment [SFTT]
- Cadmium Right End Surface Of Body And Chromate Right End Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Right End Surface Of Left Flange And Chromate Right End Surface Of Left Flange
Weapon Systems (WSDC) 3120-01-185-2888
DLA Procurement Analysis 3120-01-185-2888
- Last Stock Position:
- 73 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-185-2888
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-185-2888
Freight Information 3120-01-185-2888
3120-01-185-2888 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-01-185-2888 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-01-185-2888 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-185-2888 is not classified as a special type of cargo when transported by water. 3120-01-185-2888 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-185-2888
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-185-2888 3 Records
Contracting Technical Data File (CTDF) 3120-01-185-2888 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: