Premium Information is available for this item - Upgrade for $1 a day
3120-01-166-2226
Thrust Washer Bearing
3120011662226 011662226 532217CL5
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
November 2023
4
Marketplace 3120-01-166-2226
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-166-2226 5+ Documents (More...)
Thrust Washer Bearing 3120011662226 011662226 3120-01-166-2226 3120011662226 011662226 is an item
3120-01-169-7273 https//www.nsnlookup.com /cage Royal Oak Gage Inc (CAGE Code 00088) Jan 1983 3120-01-166-2226
Restrictions 3120-01-166-2226
3120-01-166-2226 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-166-2226
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-166-2226
- US Air Force (FXGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FXCX
Approved Sources 3120-01-166-2226
- Part Number
- Manufacturer
- Status
- 532217CL5
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 532217CL5
- 06959 - Hanwha Aerospace Usa Llc (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 31340 - Enjet Aero Bloomfield, Llc (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 33436 - Beta Engineering, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 33617 - Electro Methods Inc (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 52661 - Rtx Corporation (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 9Y765 - Numet Machining Techniques, Llc (Active)
- Secondary Buy
- Secondary Buy
- 532217CL5
- 21128 - Jdmc Enterprises Dba High Speed (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 532217CL5
- 00088 - Royal Oak Gage Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-166-2226
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- End Item Identification [AGAV]
- Acft Eng Tf-33
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 0.5500 Inches Minimum And 0.5700 Inches Maximum
- Hardness Rating [CQFM]
- 30.0 Rockwell C Minimum Overall And 38.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Overall
- Outside Diameter [ABKV]
- 0.9910 Inches Minimum And 0.9950 Inches Maximum
- Material Document And Classification [MDCL]
- Ams-5613 Assn Std Single Material Response Overall
- Overall Thickness [ADUM]
- 0.0910 Inches Minimum And 0.0940 Inches Maximum
- Style Designator [STYL]
- Round
- Surface Finish [CSYM]
- 16.0 Microinches Left Side
- Surface Finish [CSYM]
- 16.0 Microinches Right Side
Weapon Systems (WSDC) 3120-01-166-2226
DLA Procurement Analysis 3120-01-166-2226
- Last Stock Position:
- 11 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-166-2226
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Apr 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Jan 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- RV
- PRATT & WHITNEY JET ENGINES & COMPONENTS TF-33
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-166-2226
Freight Information 3120-01-166-2226
3120-01-166-2226 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-166-2226 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-166-2226 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-166-2226 is not classified as a special type of cargo when transported by water. 3120-01-166-2226 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-166-2226
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-166-2226 4 Records
Contracting Technical Data File (CTDF) 3120-01-166-2226 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- H
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: