Premium Information is available for this item - Upgrade for $1 a day
3120-01-154-7174
Thrust Washer Bearing
3120011547174 011547174 5740311 24241242 8626372 3120PL0740045
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
November 2023
18
Marketplace 3120-01-154-7174
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-154-7174 3+ Documents (More...)
RQST NE Updated Every Day 8626372 RQST NE Updated Every Day 3120-01-154-7174 RQST NE Updated Every Day
3120-01-154-7174 RQST Updated Every Day 3120-01-154-7174 RQST NE Related Documents 3120-01-154-7174
enable JavaScript in your web browser . 4920-01-296-8416Test Set Case4920012968416 01296841688100423 8626372
Restrictions Approved Sources Datasheet Management https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-154-7174
PLUG 2 EA NS Request Quotation Subscribe to View Vendor Details... 8626372 PLUG,MACHINE THREAD 3 EA
Thrust Washer Bearing 3120011547174 011547174 your Account Upgrade 3120-01-154-7174Thrust Washer
Restrictions 3120-01-154-7174
3120-01-154-7174 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-154-7174
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-154-7174
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZBD
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Lithuania (WI01)
- Effective Date:
- 1 Jul 2000
- Slovenia (WL01)
- Effective Date:
- 1 Feb 2005
- Poland (WP01)
- Effective Date:
- 1 Jun 2011
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Denmark (ZS01)
- Effective Date:
- 1 Jul 2000
- Greece (ZU01)
- Effective Date:
- 1 Apr 2006
- Turkey (ZW01)
- Effective Date:
- 1 Apr 2004
Approved Sources 3120-01-154-7174
- Part Number
- Manufacturer
- Status
- 5740311
- Manufacturer
- 34623 - Am General Llc (Active)
- Primary Buy
- Primary Buy
- 24241242
- 7X677 - General Motors Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 8626372
- 7X677 - General Motors Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 8626372
- 11862 - General Motors Corp Chevrolet Motor (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 3120PL0740045
- 9009H - Jednolity Indeks Materialowy - (Active)
- NATO Reference
- NATO Reference
Datasheet 3120-01-154-7174
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Diameter [ABMZ]
- 2.3350 Inches Nominal
- Hardness Rating [CQFM]
- 72.0 Rockwell Superficial 15-T Minimum Outer Layer
- Material Document And Classification [MDCL]
- Sae 799 Assn Std Single Material Response Outer Layer Or Sae 794 Assn Std Single Material Response Outer Layer
- Material Document And Classification [MDCL]
- Sae Assn Std All Material Responses Inner Layer Or Aisi Assn Std All Material Responses Inner Layer
- Material [MATT]
- Copper Alloy Outer Layer
- Material [MATT]
- Steel Comp 1015 Inner Layer Or Steel Comp 1005 Inner Layer
- Outside Diameter [ABKV]
- 3.2800 Inches Nominal
- Lubrication Feature [CTLM]
- Groove Left Side
- Lubrication Feature [CTLM]
- Groove Right Side
- Special Features [FEAT]
- 4 Recessed Keys On Od,Plating May Be On Bronze Surface Only
- Surface Treatment [SFTT]
- Lead Alloy Overall
- Test Data Document [TEST]
- 11862-8645076 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 3120-01-154-7174
DLA Procurement Analysis 3120-01-154-7174
- Last Stock Position:
- 4191 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-154-7174
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- T
- Maintenance Float Secondary Non-depot Reparables
- Operational Test:
- No Special Procedures
Similar Supply Items to 3120-01-154-7174
Freight Information 3120-01-154-7174
3120-01-154-7174 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-154-7174 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-01-154-7174 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-154-7174 is not classified as a special type of cargo when transported by water. 3120-01-154-7174 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-154-7174
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-154-7174 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A713D52800001
- 18 Jun 2013
- Subscribe
- 641
- Subscribe
- Subscribe
- Subscribe
- SPE4A613VE409
- 30 May 2013
- Subscribe
- 1456
- Subscribe
- Subscribe
- Subscribe
- SPE4A613VB435
- 22 Apr 2013
- Subscribe
- 981
- Subscribe
- Subscribe
- Subscribe
- SPE4A613VA079
- 28 Mar 2013
- Subscribe
- 447
- Subscribe
- Subscribe
- Subscribe
- SPE4A613V8260
- 08 Mar 2013
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3120-01-154-7174 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: