Premium Information is available for this item - Upgrade for $1 a day
3120-01-153-7546
Sleeve Bearing
3120011537546 011537546 SAE AS81934/1 SAE-AS81934/1 AS81934/1 M81934/1-18C036 MS21240-18C036
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
November 2023
10

Marketplace 3120-01-153-7546
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-153-7546 5+ Documents (More...)
/1AS81934/1M81934/1-18C036MS21240-18C036 A tubular shaped item with or without /1 SAE-AS81934/1 06-211
/1-20C044 MIL-B /1 SAE-AS81934/1 06-211 /1-20C044 MIL-B /1 SAE-AS81934SAE-AS81934 / 06-211 /1-20C044

/fsg-31/fsc-3120/us
/1AS81934/1M81934 / 1 06-211 /1-20C044 MIL-B-81934/1 BJ40TH44M /1 SAE-AS81934/1 06-211 Bearing 3120015080958015080958SAE-AS81934
3120-01-194-4514 Sleeve Bearing 3120011944514 011944514, /1 LD131-0022-0409 M81934/1-04C009 SAE AS81934/1
SAE-AS81934/1 06-211 /1-20C044 / 1 06-211 /1-20C044 MIL-B-81934/1 BJ40TH44M https//www.nsnlookup.com
011537546 SAE AS81934/1 SAE-AS81934/1AS81934/1 M81934/1-18C036 MS21240-18C036 A tubular shaped item

/fsg-31/fsc-3120/us
06-211 /1-20C044 BJ40TH44M AS81934/1SAE-AS81934 /1SAE-AS81934/ 06-211 /1-20C044 MIL-B /1 SAE-AS81934 /1
Sleeve Bearing 3120012654834012654834 /1-20C044 MIL-B /1 SAE-AS81934 /1 06-211 /1-20C044 BJ40TH44M https

/fsg-31/fsc-3120/us
Sleeve Bearing 3120011537546 011537546, /1-20C044 MIL-B /1 SAE-AS81934 /1 06-211 /1 1 BJ40TH44M
Quotation FedMall Updated Every 15 Minutes 3120-01-337-7124 20C044 MIL-B /1 SAE-AS81934 /1 -31/fsc-3120
Restrictions 3120-01-153-7546
3120-01-153-7546 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-153-7546
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-153-7546
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- France (ZF01)
- Effective Date:
- 1 Nov 2001
Approved Sources 3120-01-153-7546
- Part Number
- Manufacturer
- Status
- SAE AS81934/1
- Manufacturer
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- SAE-AS81934/1
- 0U583 - Sae International (Active)
- Incomplete Reference
- Incomplete Reference
- M81934/1-18C036
- 0U583 - Sae International (Active)
- Primary Buy
- Primary Buy
- AS81934/1
- 0U583 - Sae International (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- M81934/1-18C036
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- SAE AS81934/1
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- M81934/1-18C036
- 81349 - Military Specifications (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- MS21240-18C036
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AS81934/1
- 81343 - Society Of Automotive Engineers Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-153-7546
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 1.1255 Inches Minimum And 1.1265 Inches Maximum
- Body Outside Diameter [ADAR]
- 1.3143 Inches Minimum And 1.3148 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Material [MATT]
- Steel Comp 630 Outer Layer
- Material Document And Classification [MDCL]
- Ams5643,Cond H-1150 Assn Std Single Material Response Outer Layer
- Overall Length [ABHP]
- 1.1150 Inches Minimum And 1.1250 Inches Maximum
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges
- Surface Finish [CSYM]
- 125.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Left End Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Type 1 Or 2 Mil Spec 1St Treatment Response Outer Layer Or Mil-C-5541 Mil Spec 2Nd Treatment Response Outer Layer
- Surface Treatment [SFTT]
- Anodize Outer Layer Or Chromate Outer Layer
Weapon Systems (WSDC) 3120-01-153-7546
DLA Procurement Analysis 3120-01-153-7546
Management Data 3120-01-153-7546
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-153-7546
Freight Information 3120-01-153-7546
3120-01-153-7546 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 133300. A Sub NMFC of Z. It has a NMFC Description of MACHINERY/MACHINES NOI. 3120-01-153-7546 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 63220 which rates the freight between FCL and LCL. 3120-01-153-7546 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-153-7546 is not classified as a special type of cargo when transported by water. 3120-01-153-7546 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-153-7546
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3120-01-153-7546 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A621PN608
- 28 Jun 2021
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE4A619V3110
- 13 Nov 2018
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE4A517P9568
- 24 Aug 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE4A617PF805P00001
- 20 Jun 2017
- Subscribe
- 22
- Subscribe
- Subscribe
- Subscribe
- SPE4A517P4641
- 07 Mar 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3120-01-153-7546 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: