Premium Information is available for this item - Upgrade for $1 a day
3120-01-152-9363
Rod End Plain Bearing
3120011529363 011529363 CFSL-8-B2
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING. View more Rod End Plain Bearing
May 2023
3
Marketplace 3120-01-152-9363
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-152-9363 1+ Documents (More...)
Restrictions 3120-01-152-9363
3120-01-152-9363 is a Rod End Plain Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-152-9363
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-152-9363
- US Air Force (FUGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FUCX
Approved Sources 3120-01-152-9363
- Part Number
- Manufacturer
- Status
- CFSL-8-B2
- Manufacturer
- 78118 - Mpb Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-01-152-9363
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Bore Center To Shank End Distance [AGGG]
- 2.1250 Inches Nominal
- Bore Diameter [ABXV]
- 0.5000 Inches Nominal
- Material [MATT]
- Copper Alloy Inner Member
- Material [MATT]
- Steel Rod End Body
- Material [MATT]
- Steel Spherical Surface Of Race Insert
- Outer Member Outside Diameter [AGGF]
- 1.3750 Inches Nominal
- Outer Member Width [AGGH]
- 0.5000 Inches Nominal
- Inner Member Width [AGGJ]
- 0.6250 Inches Nominal
- Lubrication Material [ADZG]
- Lubricating Oil
- Shank Style [AAZF]
- Internally Threaded W/ Hexagon End
- Shank Thread Length [AGGY]
- 1.1870 Inches Nominal
- Shank Width Across Wrench Flats [AGHB]
- 0.8750 Inches Nominal
- Overall Length [ABHP]
- 2.8125 Inches Nominal
- Special Features [FEAT]
- High Tensile Steel Stud Assembled With Sintered Ball,Threaded 1In. Lg,0.5-20Unf3a,Right Hand With Hex Section For Tightening
- Static Radial Load Rating [AGKP]
- 75000 Pounds
- Style Designator [STYL]
- Ball Type
- Surface Treatment [SFTT]
- Cadmium Rod End Body
- Surface Treatment [SFTT]
- Oxide Spherical Surface Of Race Insert
- Thread Class [AAJD]
- 3B
- Thread Diameter [AWDP]
- 0.5000 Inches Nominal
- Thread Direction [AAJF]
- Left-Hand
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 3120-01-152-9363
Management Data 3120-01-152-9363
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NM
- NONEXPLOSIVE MANAGED ASSETS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-152-9363
Freight Information 3120-01-152-9363
3120-01-152-9363 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-152-9363 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3120-01-152-9363 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-152-9363 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-152-9363 is not classified as a special type of cargo when transported by water. 3120-01-152-9363 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-152-9363 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: