Premium Information is available for this item - Upgrade for $1 a day
3120-01-141-2521
Sleeve Bearing
3120011412521 011412521 NH7505A8-030 AFGDA8-030 KDJ08A030-59 07-382-8E-030-001 C7505A8-030 FBJW16TH030W
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
7
Marketplace 3120-01-141-2521
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-141-2521 3+ Documents (More...)
/fsg-31/fsc-3120/us
Restrictions 3120-01-141-2521
3120-01-141-2521 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-141-2521
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-141-2521
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3120-01-141-2521
- Part Number
- Manufacturer
- Status
- NH7505A8-030
- Manufacturer
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- AFGDA8-030
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Secondary Buy
- Secondary Buy
- KDJ08A030-59
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Secondary Buy
- Secondary Buy
- 07-382-8E-030-001
- 09455 - Rbc Transport Dynamics Corp (Active)
- Secondary Buy
- Secondary Buy
- FBJW16TH030W
- 21335 - Timken Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- C7505A8-030
- 81755 - Lockheed Martin Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3120-01-141-2521
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.5005 Inches Minimum And 0.5015 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.6260 Inches Minimum And 0.6265 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Corner Shape [BZLX]
- Undercut Left Flange Body Corner
- Flange Outside Diameter [AEPR]
- 0.7400 Inches Minimum And 0.7600 Inches Maximum
- Flange Width [AGFF]
- 0.0570 Inches Minimum And 0.0620 Inches Maximum
- Material Document And Classification [MDCL]
- Mil-B-81934 Mil Spec Single Material Response Left End Surface Of Body And Flange And Mil-B-81934/2 Mil Spec Single Material Response Left End Surface Of Body And Flange
- Material Document And Classification [MDCL]
- Mil-B-81934 Mil Spec Single Material Response Inner Layer And Mil-B-81934/2 Mil Spec Single Material Response Inner Layer
- Material Document And Classification [MDCL]
- Qq-A-225/6,Cond T851 Fed Spec Single Material Response Outer Layer Or Qq-A-200/3,Cond T8511 Fed Spec Single Material Response Outer Layer
- Material [MATT]
- Aluminum Alloy 2024 Outer Layer
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Material [MATT]
- Plastic Polytetrafluoroethylene Left End Surface Of Body And Flange
- Overall Length [ABHP]
- 0.3520 Inches Minimum And 0.3670 Inches Maximum
- Specification/Standard Data [ZZZK]
- 81755-C7505 Manufacturers Standard
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625 Mil Spec 1St Treatment Response Outer Layer Or Mil-C-5541 Mil Spec 2Nd Treatment Response Outer Layer
- Surface Treatment [SFTT]
- Anodize Outer Layer Or Chromate Outer Layer
DLA Procurement Analysis 3120-01-141-2521
Management Data 3120-01-141-2521
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-141-2521
Freight Information 3120-01-141-2521
3120-01-141-2521 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-01-141-2521 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-01-141-2521 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-141-2521 is not classified as a special type of cargo when transported by water. 3120-01-141-2521 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-141-2521
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3120-01-141-2521 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: