Premium Information is available for this item - Upgrade for $1 a day
3120-01-100-8415
Sleeve Bushing
3120011008415 011008415 414DS120-4 ATLF08-124D
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
May 2023
7
Marketplace 3120-01-100-8415
Request a Quotation from participating marketplace vendors
Restrictions 3120-01-100-8415
3120-01-100-8415 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-100-8415
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-100-8415
- US Army (A919)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- A180
- Spain (YB01)
- Effective Date:
- 1 Mar 1999
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3120-01-100-8415
- Part Number
- Manufacturer
- Status
- 414DS120-4
- Manufacturer
- 77272 - The Boeing Company (Active)
- Source Control
- Source Control
- ATLF08-124D
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-01-100-8415
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.5000 Inches Minimum And 0.5015 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.6410 Inches Minimum And 0.6420 Inches Maximum
- Corner Shape [BZLX]
- Round Center Flange Left Body Corner
- Corner Shape [BZLX]
- Square Center Flange Outside Left Corner
- Corner Shape [BZLX]
- Square Center Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Center Flange Right Body Corner
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- End To Flange Distance [AJFM]
- 0.0730 Inches Minimum And 0.0780 Inches Maximum
- Flange Outside Diameter [AEPR]
- 1.5000 Inches Nominal
- Flange Width [AGFF]
- 0.0570 Inches Minimum And 0.0620 Inches Maximum
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum Overall And 38.0 Rockwell C Maximum Overall
- Material [MATT]
- Plastic Outer Layer
- Material [MATT]
- Steel Corrosion Resisting Inner Layer
- Left End Body Diameter [CTSN]
- 0.6410 Inches Minimum And 0.6420 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5969 15-5Ph Mil Std Single Material Response Overall
- Overall Length [ABHP]
- 0.5350 Inches Minimum And 0.5400 Inches Maximum
- Special Features [FEAT]
- Liner Od Of Body And Right Side Of Flange Bonding Agent And Liner Shallnot Be Affected By Mil-H-5606/Mil-H-83282 Hydraulic Fluid
- Style Designator [STYL]
- Solid, External Flange
- Surface Finish [CSYM]
- 125.0 Microinches Left End Surface Of Body And Flange
- Surface Finish [CSYM]
- 63.0 Microinches Inside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Bac 575181205 Mfr Ref Single Treatment Response Inner Layer
- Surface Treatment [SFTT]
- Passivate Inner Layer
- Test Data Document [TEST]
- 81205-Bac-5424 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 3120-01-100-8415
Management Data 3120-01-100-8415
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
NATO Stock Numbers Related to 3120-01-100-8415
Freight Information 3120-01-100-8415
3120-01-100-8415 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-100-8415 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 3120-01-100-8415 is rated as class 65 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-100-8415 is not classified as a special type of cargo when transported by water. 3120-01-100-8415 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-100-8415
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Non-Metallic Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3120-01-100-8415 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: