Premium Information is available for this item - Upgrade for $1 a day
3120-01-100-6338
Rod End Plain Bearing
3120011006338 011006338 4059T08P02 ARBL3E82
A detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. It is used to carry a load and to reduce sliding friction. It does not employ rolling elements. The outer member of the assembly is modified to provide a shank. The inner member may be either a plain spherical bearing or a sleeve bearing. Excludes BEARING, PLAIN, SPHERICAL and BEARING, PLAIN, SELF-ALIGNING. View more Rod End Plain Bearing
June 2023
2
Marketplace 3120-01-100-6338
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-100-6338 1+ Documents (More...)
Restrictions 3120-01-100-6338
3120-01-100-6338 is a Rod End Plain Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-01-100-6338
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-100-6338
- US Air Force (FXGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FXCX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GGGT
Approved Sources 3120-01-100-6338
- Part Number
- Manufacturer
- Status
- 4059T08P02
- Manufacturer
- 99207 - General Electric Company (Active)
- Source Control
- Source Control
- ARBL3E82
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-01-100-6338
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Bore Center To Shank End Distance [AGGG]
- 0.8960 Inches Minimum And 0.9160 Inches Maximum
- Bore Diameter [ABXV]
- 0.1895 Inches Minimum And 0.1900 Inches Maximum
- Hardness Rating [CQFM]
- 40.0 Rockwell C Nominal Rod End Body
- Hardness Rating [CQFM]
- 62.0 Rockwell C Nominal Inner Member
- Hardness Rating [CQFM]
- 62.0 Rockwell C Nominal Race Insert
- Material [MATT]
- Steel Comp 440C Inner Member
- Material [MATT]
- Steel Comp 440C Race Insert
- Material [MATT]
- Steel Comp 630 Rod End Body
- Outer Member Outside Diameter [AGGF]
- 0.5620 Inches Nominal
- Outer Member Width [AGGH]
- 0.1770 Inches Minimum And 0.1970 Inches Maximum
- Inner Member Width [AGGJ]
- 0.2450 Inches Minimum And 0.2500 Inches Maximum
- Material Document And Classification [MDCL]
- Ams5630 Assn Std 2Nd Material Response Race Insert
- Material Document And Classification [MDCL]
- Ams5630 Assn Std 1St Material Response Inner Member
- Material Document And Classification [MDCL]
- Ams5643 Assn Std 3Rd Material Response Rod End Body
- Shank Style [AAZF]
- Externally Threaded
- Shank Thread Length [AGGY]
- 0.5010 Inches Minimum And 0.5910 Inches Maximum
- Overall Length [ABHP]
- 1.1770 Inches Minimum And 1.1970 Inches Maximum
- Special Features [FEAT]
- Metallic Hardness Rating And Metallic Hardness Location Replies Are Listed In Sequence
- Static Radial Load Rating [AGKP]
- 200 Pounds
- Style Designator [STYL]
- Ball Type
- Surface Treatment Document And Classification [STDC]
- Qq-C-320,Class2 Assn Std Single Treatment Response Inner Member
- Surface Treatment [SFTT]
- Chromium Inner Member
- Thread Class [AAJD]
- 3A
- Thread Diameter [AWDP]
- 0.190 Inches Nominal
- Thread Direction [AAJF]
- Left-Hand
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
DLA Procurement Analysis 3120-01-100-6338
Management Data 3120-01-100-6338
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- OP
- TF-34
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-100-6338
Freight Information 3120-01-100-6338
3120-01-100-6338 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-100-6338 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3120-01-100-6338 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-100-6338 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-100-6338 is not classified as a special type of cargo when transported by water. 3120-01-100-6338 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-100-6338 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: