Premium Information is available for this item - Upgrade for $1 a day
3120-01-083-9677
Sleeve Bushing
3120010839677 010839677 A47261 A42323 800139 R21580
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
June 2023
11
Marketplace 3120-01-083-9677
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-083-9677 5+ Documents (More...)
United States (US) 4. 3120-01-083-9677 Marketplace Restrictions Approved Sources Datasheet Management
,SLEEVE 100 EA NS Request Quotation Updated Every Day 3120-01-083-9677 RQST NE Updated Every Day 3120
https//www.nsnlookup.com /fsg-30/fsc-3040/fr 3040-14-303-7549 Spur Gearshaft 3040143037549143037549,A42323
gearshaft with a single complement of spur gear https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-083-9677
-0200 A47261-200 A microphone which depends for its operation upon variations in reluctance of a magnetic
Sleeve Bushing 3120010839677 010839677,A47261 0863Bearing Roller3110661070863 661070863 800139
Users 4010-21-913-9214 Canada (ZC) Approved Leg Wire Rope Assembly4010219139214 219139214 642-800139
14-483-1231 Thrust Ball Bearing 3110144831231 144831231 0863Bearing Roller3110661070863 661070863 800139
JavaScript in your web browser . 4720-17-101-5913Nonmetallic Hose Assembly4720171015913 171015913 800139
4720-17-101-5913 Nonmetallic Hose Assembly 4720171015913 062-4607 Part NumberManufacturerStatus50-800139
Restrictions 3120-01-083-9677
3120-01-083-9677 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-083-9677
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-083-9677
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3120-01-083-9677
- Part Number
- Manufacturer
- Status
- A47261
- Manufacturer
- 10988 - Cnh Industrial America Llc (Active)
- Primary Buy
- Primary Buy
- 800139
- 16764 - General Motors Corp Delco Remy Div (Replaced)
- Original Design
- Original Design
- A42323
- 10988 - Cnh Industrial America Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 800139
- 1LW55 - Borgwarner Pds (Anderson), L.L.C. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- R21580
- 10988 - Cnh Industrial America Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-083-9677
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.5500 Inches Minimum And 0.5550 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.6870 Inches Minimum And 0.6900 Inches Maximum
- Overall Length [ABHP]
- 0.8850 Inches Minimum And 0.8950 Inches Maximum
- Special Features [FEAT]
- Blind Id,Depth Of Hole 0.8150 In. Min To 0.8250 In. Max,Hole Begins Opposite Chamfered End
Weapon Systems (WSDC) 3120-01-083-9677
DLA Procurement Analysis 3120-01-083-9677
Management Data 3120-01-083-9677
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-083-9677
Freight Information 3120-01-083-9677
3120-01-083-9677 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-01-083-9677 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-01-083-9677 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-083-9677 is not classified as a special type of cargo when transported by water. 3120-01-083-9677 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-083-9677
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3120-01-083-9677 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: