Premium Information is available for this item - Upgrade for $1 a day
3120-01-083-1642
Sleeve Bushing
3120010831642 010831642 014708
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
May 2023
11
Marketplace 3120-01-083-1642
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-083-1642 5+ Documents (More...)
Restrictions 3120-01-083-1642
3120-01-083-1642 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-01-083-1642
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-083-1642
- US Air Force (FUGG)
- Effective Date:
- 1 Sep 2006
- Poland (WP)
- Poland (WP01)
- Effective Date:
- 1 Feb 2007
- Denmark (ZS)
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- United States of America (ZZ)
Approved Sources 3120-01-083-1642
- Part Number
- Manufacturer
- Status
- 014708
- Manufacturer
- K6111 - Qioptiq Ltd (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-01-083-1642
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.1460 Inches Nominal
- Body Outside Diameter [ADAR]
- 0.3730 Inches Minimum And 0.3740 Inches Maximum
- Flange Outside Diameter [AEPR]
- 0.7260 Inches Minimum And 0.7300 Inches Maximum
- Flange Width [AGFF]
- 0.2080 Inches Minimum And 0.2100 Inches Maximum
- Overall Length [ABHP]
- 0.6650 Inches Nominal
- Special Features [FEAT]
- Bushng Center Hole Is C/Bored On Flange End 0.3000 In. Dia By 0.1000 In. Deep;Outer Face Of Flange Has 4 0.094 In. Dia Holes Equally Spaced. Each Hole Is C/Bored 0.177 In. Dia By 0.070 In. Deep
- Style Designator [STYL]
- Solid, External Flange One End
Weapon Systems (WSDC) 3120-01-083-1642
DLA Procurement Analysis 3120-01-083-1642
Management Data 3120-01-083-1642
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- WF
- F-16 AIR COMBAT FIGHTER
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-083-1642
Freight Information 3120-01-083-1642
3120-01-083-1642 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-01-083-1642 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3120-01-083-1642 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-01-083-1642 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-083-1642 is not classified as a special type of cargo when transported by water. 3120-01-083-1642 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-01-083-1642 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: