Premium Information is available for this item - Upgrade for $1 a day
3120-01-043-1700
Linear-Rotary Motion Roller
3120010431700 010431700 KDJ7-37 79381 AD07-105SS TRWW14-SFS495 GB528BT6 NH07-105SS
A cylindrical body having a centrally located hole to accommodate a pin or shaft for attachment to a push rod guide, yoke, rocker arm, turntable, or rail. The item provides a rolling contact with the face of a valve stem, or the lobes of a cam ring or camshaft on engines, fuel injection pumps, latches, turntables, parallel bearing surfaces requiring a roller support, and the like. Excludes BEARING, ROLLER, CYLINDRICAL; ROLLER, ELECTRICAL SWITCH; and friction bearings. See also CAM FOLLOWER, NEEDLE BEARING. View more Linear-Rotary Motion Roller
June 2023
7
Marketplace 3120-01-043-1700
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-043-1700 5+ Documents (More...)
NH07-105SS ROLLER,LINEAR-ROTARY MOTION 2 EA NS Request Quotation FedMall Updated Every 15 Minutes 3120
-01-043-1700 BUY NE FedMall Updated Every Day TRWW14-SFS495 RQST NE Updated Every Day GB528BT6 RQST NE
3511-131-79381 A definite length of CABLE, RADIO FREQUENCY having one or both ends processed and/or
Motion Roller 3120010431700 Assembly 5995144214966 https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120
www.nsnlookup.com /fsg-62/fsc-6220/fr 6220-14-278-3616 Couronne Feu De For 6220142783616142783616 160-79381
-230-0554 Pointe Avant 1055142300554 142300554,79381 Assembly 5995144214966 3511 131 793813511-131-79381
3511-130-79381 A grouping of two or more physically connected or related electrical an/or electronic
59/fsc-5999/fr 5999-14-041-7385 Circuit Card Assembly 5999140417385140417385 3511 130 793813511-130-79381
3511 957 79381 LG77938 An item consisting of a partial turn as one or more turns of wire or other conductive
-230-0554 Pointe Avant 1055142300554 142300554,79381 5999140417385140417385 3511 130 793813511-130-79381
Restrictions 3120-01-043-1700
3120-01-043-1700 is a Linear-Rotary Motion Roller that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-01-043-1700
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-043-1700
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Supplementary Collaborators:
- GTKE
Approved Sources 3120-01-043-1700
- Part Number
- Manufacturer
- Status
- GB528BT6
- Manufacturer
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- GB528BT6
- 21335 - Timken Co (Active)
- Primary Buy
- Primary Buy
- GB528BT6
- 09455 - Rbc Transport Dynamics Corp (Active)
- Primary Buy
- Primary Buy
- GB528BT6
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Primary Buy
- Primary Buy
- KDJ7-37
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- 79381
- 09455 - Rbc Transport Dynamics Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- AD07-105SS
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- TRWW14-SFS495
- 21335 - Timken Co (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- NH07-105SS
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- GB528BT6
- 26512 - Northrop Grumman Systems Corporation (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3120-01-043-1700
- Characteristic
- Specifications
- FIIG
- Specifications
- T267-K
- Bore Inside Diameter [BCXD]
- 0.436 Inches Minimum And 0.437 Inches Maximum
- Casehardening Indicator [AASG]
- Not Casehardened
- Chamfer/Radius Of Outside Corner [BQWC]
- 0.021 In. Min,0.031 In. Max Radius
- Face Width [AQPL]
- 1.021 Inches Minimum And 1.031 Inches Maximum
- Material [MATT]
- Steel,Ams 5630 And Plastic,Polytetrafluoroethylene
- Metallic Hardness Rating [AETC]
- 58.0 Minimum Rockwell C
- Outside Diameter [ABKV]
- 0.874 Inches Minimum And 0.875 Inches Maximum
- Special Features [FEAT]
- Plastic Liner Bonded To Bore And Faces
- Style Designator [STYL]
- Plain
Weapon Systems (WSDC) 3120-01-043-1700
DLA Procurement Analysis 3120-01-043-1700
Management Data 3120-01-043-1700
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-01-043-1700
Freight Information 3120-01-043-1700
3120-01-043-1700 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114690. A Sub NMFC of Z. It has a NMFC Description of BALLS/ROLLS BEARING. 3120-01-043-1700 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58770 which rates the freight between FCL and LCL. 3120-01-043-1700 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-043-1700 is not classified as a special type of cargo when transported by water. 3120-01-043-1700 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-043-1700
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3120-01-043-1700 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: