Premium Information is available for this item - Upgrade for $1 a day
3120-01-015-9712
Sleeve Bearing
3120010159712 010159712 3277466 3278345 554003
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
August 2023
9
Marketplace 3120-01-015-9712
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-015-9712 5+ Documents (More...)
/fsg-31/fsc-3120/us
United States (US) 4. 3120-01-015-9712 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 3277466 RQST NE Updated Every Day 554003 RQST NE Updated Every Day 3120-01
https Gummed Tape 8135226069752 226069752,554003 554003 https/ https//www.nsnlookup.com /fsg-26/fsc-
Sleeve Bearing 3120010159712 010159712 Upgrade your Account Upgrade 3120-01-015-9712Sleeve Bearing3120010159712
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-015-9712 Sleeve Bearing 3120010159712 010159712
Upgrade your Account Upgrade 3120-01-015-9712Sleeve Bearing3120010159712 010159712 3277466 3278345 554003
how to enable JavaScript in your web browser . 5305-15-105-1104Vite Arresto5305151051104 151051104 554003
JavaScript in your web browser . 5365-14-424-2286Externally Threaded Ring5365144242286 144242286 554003
/fsg-73/fsc-7320/nl
JavaScript in your web browser . 5365-14-424-2286Externally Threaded Ring5365144242286 144242286 554003
JavaScript in your web browser . 5365-14-424-2286Externally Threaded Ring5365144242286 144242286 554003
Restrictions 3120-01-015-9712
3120-01-015-9712 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-01-015-9712
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-015-9712
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Jan 1998
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
Approved Sources 3120-01-015-9712
- Part Number
- Manufacturer
- Status
- 3278345
- Manufacturer
- 15434 - Cummins Inc. (Active)
- Primary Buy
- Primary Buy
- 3277466
- K4843 - Cummins Ltd (Active)
- Secondary Buy
- Secondary Buy
- 3278345
- K4843 - Cummins Ltd (Active)
- Secondary Buy
- Secondary Buy
- 554003
- 15434 - Cummins Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-01-015-9712
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Antirotation/Lubrication Type And Quantity [CTJM]
- 1 Hole And 1 Slot
- Body Inside Diameter [ADAS]
- 2.0000 Inches Nominal
- Body Outside Diameter [ADAR]
- 2.1875 Inches Nominal
- Corner Shape [BZLX]
- Square All Corners
- Hole Diameter [AAUB]
- 0.3906 Inches Nominal First
- Material [MATT]
- Copper Alloy Intermediate Layer
- Material [MATT]
- Lead Alloy Inner Layer
- Material [MATT]
- Steel Outer Layer
- Slot Length [ABGD]
- 0.7812 Inches Nominal First
- Slot Width [ABGC]
- 0.4800 Inches Nominal First
- Overall Length [ABHP]
- 1.8900 Inches Minimum And 1.9100 Inches Maximum
- Style Designator [STYL]
- Split, Plain, No Outside Flanges
- Surface Treatment [SFTT]
- Tin Outer Layer
DLA Procurement Analysis 3120-01-015-9712
Management Data 3120-01-015-9712
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-015-9712
Freight Information 3120-01-015-9712
3120-01-015-9712 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-015-9712 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-01-015-9712 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-015-9712 is not classified as a special type of cargo when transported by water. 3120-01-015-9712 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-015-9712
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-015-9712 2 Records
Contracting Technical Data File (CTDF) 3120-01-015-9712 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: