Premium Information is available for this item - Upgrade for $1 a day
3120-01-009-9828
Sleeve Bushing
3120010099828 010099828 742879P25 742879
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
November 2023
8

Marketplace 3120-01-009-9828
Request a Quotation from participating marketplace vendors
Related Documents 3120-01-009-9828 5+ Documents (More...)

/fsg-31/fsc-3120/us
United States (US) 4. 3120-01-009-9828 Marketplace Restrictions Approved Sources Datasheet Management
Quotation FedMall Updated Every 15 Minutes 3120-01-009-9828 BUY NE FedMall Updated Every Day 3120-01
www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-057-8366 Cable Clamp To Connector Adapter 010578366 742879
www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-056-7713 Cable Clamp To Connector Adapter 010567713 742879
www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-056-7713 Cable Clamp To Connector Adapter 010567713 742879
www.nsnlookup.com /fsg-59/fsc-5935/us 5935- https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-01-009-9828
www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-176-4433 Cable Clamp To Connector Adapter 011764433 742879
Sleeve Bushing 3120010099828 010099828 Quotation from participating marketplace vendors https//
www.nsnlookup.com /fsg-59/fsc-5935/us 5935-01-057-8366 Cable Clamp To Connector Adapter 010578366 742879
Sleeve Bushing 3120010099828 010099828 1889 Tubo 2930150031889 150031889,742879 742879 https//www.nsnlookup.com
Restrictions 3120-01-009-9828
3120-01-009-9828 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-01-009-9828
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-01-009-9828
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
- Supplementary Collaborators:
- SX
Approved Sources 3120-01-009-9828
- Part Number
- Manufacturer
- Status
- 742879P25
- Manufacturer
- 77445 - Rtx Corporation (Active)
- Primary Buy
- Primary Buy
- 742879P25
- 05812 - Horst Engineering & Manufacturing Co (Active)
- Secondary Buy
- Secondary Buy
- 742879P25
- 99106 - American Aircraft Parts Mfg. Co. (Active)
- Secondary Buy
- Secondary Buy
- 742879
- 77445 - Rtx Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3120-01-009-9828
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 1.6360 Inches Minimum And 1.6400 Inches Maximum
- Body Outside Diameter [ADAR]
- 1.9300 Inches Minimum And 1.9310 Inches Maximum
- Corner Shape [BZLX]
- Chamfered Inside Left Corner
- Corner Shape [BZLX]
- Chamfered Outside Right Corner
- Corner Shape [BZLX]
- Round Inside Right Corner
- Hardness Rating [CQFM]
- 30.0 Rockwell C Minimum Overall And 40.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Comp E9310 Overall
- Material Document And Classification [MDCL]
- Ams 6260 Assn Std Single Material Response Overall
- Right Internal Flange Hole Diameter [AGFJ]
- 1.4450 Inches Minimum And 1.4650 Inches Maximum
- Right Internal Flange Width [AGFL]
- 0.0830 Inches Minimum And 0.0870 Inches Maximum
- Overall Length [ABHP]
- 0.7500 Inches Minimum And 0.7700 Inches Maximum
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges, Internal Flange One End
Weapon Systems (WSDC) 3120-01-009-9828
DLA Procurement Analysis 3120-01-009-9828
- Last Stock Position:
- 5 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-01-009-9828
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- May 2023
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-01-009-9828
Freight Information 3120-01-009-9828
3120-01-009-9828 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-01-009-9828 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-01-009-9828 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-01-009-9828 is not classified as a special type of cargo when transported by water. 3120-01-009-9828 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-01-009-9828
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-01-009-9828 1 Records
Contracting Technical Data File (CTDF) 3120-01-009-9828 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- H
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: