Premium Information is available for this item - Upgrade for $1 a day
3120-00-853-4269
Thrust Washer Bearing
3120008534269 008534269 A21017 SPM238RB90-106
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
May 2023
11
Marketplace 3120-00-853-4269
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-853-4269 2+ Documents (More...)
Restrictions 3120-00-853-4269
3120-00-853-4269 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-00-853-4269
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-853-4269
- US Army (A919)
- Effective Date:
- 1 Feb 2005
- Supplementary Receivers:
- AZ
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- US Navy (N9BG)
- Effective Date:
- 1 Feb 2005
- Supplementary Collaborators:
- HD
- Spain (YB)
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ)
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- United States of America (ZZ)
Approved Sources 3120-00-853-4269
- Part Number
- Manufacturer
- Status
- A21017
- Manufacturer
- 10988 - Cnh Industrial America Llc (Active)
- Primary Buy
- Primary Buy
- SPM238RB90-106
- 45225 - Bosch Automotive Service Solutions (Active)
- Secondary Buy
- Secondary Buy
- SPM238RB90-106
- 53781 - Spx Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-00-853-4269
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 2.2600 Inches Nominal
- Material [MATT]
- Iron Alloy Overall
- Outside Diameter [ABKV]
- 3.2600 Inches Nominal
- Lubrication Material [ADZG]
- Lubricating Oil
- Overall Thickness [ADUM]
- 0.1235 Inches Nominal
- Style Designator [STYL]
- Round
DLA Procurement Analysis 3120-00-853-4269
Management Data 3120-00-853-4269
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-853-4269
Freight Information 3120-00-853-4269
3120-00-853-4269 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 119360. A Sub NMFC of X. It has a NMFC Description of DEODORIZERS DRY CLEANING CLOTHING. 3120-00-853-4269 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 60820 which rates the freight between FCL and LCL. 3120-00-853-4269 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-853-4269 is not classified as a special type of cargo when transported by water. 3120-00-853-4269 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-00-853-4269 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: