Premium Information is available for this item - Upgrade for $1 a day
3120-00-815-0011
Sleeve Bushing
3120008150011 008150011 LS3859 LS3859F6-30
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
November 2023
16
Marketplace 3120-00-815-0011
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-815-0011 5+ Documents (More...)
LS3859 BUSHING,SLEEVE 104 EA NS Request Quotation LS3859 LS3859-12-16 BUSHING,SLEEVE 20 EA NS Request
BUSHING,SLEEVE 104 EA NS Request Quotation LS3859 111 EA NS Request Quotation LS3859 BUSHING,SLEEVE
/fsg-31/fsc-3120/us
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-815-0011 Sleeve Bushing 3120008150011 008150011
,LS3859 LS3859 BUSHING,SLEEVE 104 EA NS Request Quotation LS3859F6-30 BUSHING,SLEEVE 135 EA NS Request
/fsg-31/fsc-3120/us
LS3859 BUSHING,SLEEVE 104 EA NS Request Quotation LS3859 LS3859-12-16 BUSHING,SLEEVE 20 EA NS Request
-6-36 BUSHING,SLEEVE 111 EA NS Request Quotation LS3859 BUSHING,SLEEVE 104 EA NS Request Quotation LS3859
/fsg-31/fsc-3120/us
LS3859-3-7 BUSHING,SLEEVE 3 EA NS Request Quotation Subscribe to View Vendor Details...
LS3859-6-8 BUSHING,SLEEVE 77 EA NS Request Quotation Subscribe to View Vendor Details...
/fsg-31/fsc-3120/us
LS3859-3P46 BUSHING,SLEEVE 54 EA NS Request Quotation Updated Every Day 3120-01-502-9747 RQST NE Updated
1435 Aircraft Structural Component Fitting El4202en8-7 Pins; 12 En1182nd8 Nuts; 1 Lk200f3 Nut; 1 Ls3859
Restrictions 3120-00-815-0011
3120-00-815-0011 is a Sleeve Bushing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal. This item is punched card equipment such as collating machines, key punch machines, tabulating machines, verifier, producer, summary punch, sorter or interpreter.
Import and Export 3120-00-815-0011
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-815-0011
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Poland (WP01)
- Effective Date:
- 1 Aug 2011
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Oct 1993
- Germany (ZG01)
- Effective Date:
- 1 Feb 2005
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
Approved Sources 3120-00-815-0011
- Part Number
- Manufacturer
- Status
- LS3859F6-30
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- LS3859
- 98897 - Lockheed Martin Corp (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3120-00-815-0011
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.3750 Inches Minimum And 0.3760 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.5011 Inches Minimum And 0.5016 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 0.6150 Inches Minimum And 0.6350 Inches Maximum
- Flange Width [AGFF]
- 0.0620 Inches Nominal
- Material [MATT]
- Steel Overall
- Overall Length [ABHP]
- 0.9380 Inches Nominal
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Treatment [SFTT]
- Cadmium Left End Surface Of Body And Flange
- Surface Treatment [SFTT]
- Cadmium Outside Diameter Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Outside Diameter Surface Of Flange
- Surface Treatment [SFTT]
- Cadmium Right End Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Right End Surface Of Left Flange
Weapon Systems (WSDC) 3120-00-815-0011
DLA Procurement Analysis 3120-00-815-0011
- Last Stock Position:
- 88 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-00-815-0011
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-815-0011
Freight Information 3120-00-815-0011
3120-00-815-0011 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 115620. A Sub NMFC of X. It has a NMFC Description of BUSHINGS NOI I/S. 3120-00-815-0011 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59240 which rates the freight between FCL and LCL. 3120-00-815-0011 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 3120-00-815-0011 is not classified as a special type of cargo when transported by water. 3120-00-815-0011 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-815-0011
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-00-815-0011 1 Records
Contracting Technical Data File (CTDF) 3120-00-815-0011 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: