Premium Information is available for this item - Upgrade for $1 a day
3120-00-661-5762
Sleeve Bearing
3120006615762 006615762 FF838-3 1898424-16 FF8383 L-289349 ITEM010 74562 074562
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
September 2023
16
Marketplace 3120-00-661-5762
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-661-5762 5+ Documents (More...)
/fsg-31/fsc-3120/us
Sleeve Bearing 3120006615762 006615762 3120-00-661-5762 3120006615762 006615762 is a tubular shaped
) Hauppauge 6. 74562 East/West Industries Inc is a Succeeded(Merged) Manufacturer with the Cage Code
https//www.nsnlookup.com /cage East/West Industries Inc (CAGE Code 74562) Hauppauge 6. 74562 East/West
: 1 8 May 1984 2940-15-205-0303 https//www.nsnlookup.com /cage East/West Industries Inc (CAGE Code 74562
) Hauppauge 6. 74562 East/West Industries Inc is a Succeeded(Merged) Manufacturer with the Cage Code
What is CAGE Code 74562?
/West Industries Inc located at , Hauppauge NY 11760, United States.Who is CAGE Code 74562?
7XHV7 refers to Town Of Rattan located at 125 State Highway 93, Rattan OK 74562-7023, United States.Where
Restrictions 3120-00-661-5762
3120-00-661-5762 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-661-5762
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-661-5762
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3120-00-661-5762
- Part Number
- Manufacturer
- Status
- FF838-3
- Manufacturer
- 70901 - Beemer Precision Inc (Active)
- Primary Buy
- Primary Buy
- FF838-3
- 70417 - Chrysler Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- L-289349 ITEM010
- 97370 - Spx Flow Us, Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 74562
- 97370 - Spx Flow Us, Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 074562
- 97370 - Spx Flow Us, Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 1898424-16
- 80064 - Naval Ship Systems Command (Active)
- Advisory Reference
- Advisory Reference
- FF8383
- 97370 - Spx Flow Us, Llc (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 3120-00-661-5762
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.7500 Inches Minimum And 0.7510 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.8760 Inches Minimum And 0.8770 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 0.9950 Inches Minimum And 1.0050 Inches Maximum
- Flange Width [AGFF]
- 0.0600 Inches Minimum And 0.0650 Inches Maximum
- Material [MATT]
- Copper Alloy Overall
- Lubrication Material [ADZG]
- Lubricating Oil
- Material Document And Classification [MDCL]
- Mil-B-5697,Ty 1,Comp A Mil Spec Single Material Response Overall
- Overall Length [ABHP]
- 0.9950 Inches Minimum And 1.0050 Inches Maximum
- Style Designator [STYL]
- Solid, External Flange One End
Weapon Systems (WSDC) 3120-00-661-5762
DLA Procurement Analysis 3120-00-661-5762
- Last Stock Position:
- 172 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-00-661-5762
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-661-5762
Freight Information 3120-00-661-5762
3120-00-661-5762 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-00-661-5762 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-00-661-5762 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-661-5762 is not classified as a special type of cargo when transported by water. 3120-00-661-5762 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-661-5762
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-00-661-5762 3 Records
Contracting Technical Data File (CTDF) 3120-00-661-5762 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: