Premium Information is available for this item - Upgrade for $1 a day
3120-00-516-0223
Sleeve Bearing
3120005160223 005160223 8745827-01 169160
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
November 2023
13
Marketplace 3120-00-516-0223
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-516-0223 5+ Documents (More...)
/fsg-31/fsc-3120/us
Quotation 169160 BEARING,SLEEVE 54 EA NS Request Quotation Subscribe to View Vendor Details... 169160
EA NS Request Quotation 8745827-01 BEARING,SLEEVE 36 EA NS Request Quotation Updated Every Day 3120-
BEARING,SLEEVE 54 EA NS Request Quotation Subscribe to View Vendor Details... 169160 BEARING,SLEEVE
BEARING,SLEEVE https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-516-0223 Sleeve Bearing 3120005160223
JavaScript in your web browser . 5360-14-235-5981Compression Helical Spring5360142355981 142355981 169160
JavaScript in your web browser . 5360-14-235-5981Compression Helical Spring5360142355981 142355981 169160
BEARING,SLEEVE 54 EA NS Request Quotation Subscribe to View Vendor Details... 169160 BEARING,SLEEVE
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-516-0223 Sleeve Bearing 3120005160223 005160223
Maintenance and Supply Agency (ZX) Approved Sources 1355-99-748-9081 Part NumberManufacturerStatusP5173 169160
Restrictions 3120-00-516-0223
3120-00-516-0223 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-00-516-0223
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-516-0223
- US Air Force (FUGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FUCX
- Columbia (YC01)
- Effective Date:
- 1 Jul 2015
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3120-00-516-0223
- Part Number
- Manufacturer
- Status
- 8745827-01
- Manufacturer
- 98747 - Ogden Air Logistics Center (Active)
- Primary Buy
- Primary Buy
- 169160
- 55284 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-00-516-0223
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.2370 Inches Minimum And 0.2390 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.3760 Inches Minimum And 0.3770 Inches Maximum
- Corner Shape [BZLX]
- Chamfered Inside Left Corner
- Corner Shape [BZLX]
- Chamfered Outside Left Corner
- Corner Shape [BZLX]
- Round Left Flange Body Corner
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 0.5620 Inches Nominal
- Flange Width [AGFF]
- 0.0940 Inches Minimum And 0.1100 Inches Maximum
- Material [MATT]
- Steel Comp 4130 Overall
- Overall Length [ABHP]
- 0.5320 Inches Minimum And 0.5480 Inches Maximum
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 130.0 Microinches Outside Diameter Surface Of Body
- Surface Finish [CSYM]
- 200.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 200.0 Microinches Left End Surface Of Body And Flange
- Surface Finish [CSYM]
- 200.0 Microinches Outside Diameter Surface Of Flange
- Surface Finish [CSYM]
- 200.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 200.0 Microinches Right End Surface Of Left Flange
- Surface Treatment [SFTT]
- Cadmium Overall
Weapon Systems (WSDC) 3120-00-516-0223
DLA Procurement Analysis 3120-00-516-0223
- Last Stock Position:
- 366 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-00-516-0223
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-516-0223
Freight Information 3120-00-516-0223
3120-00-516-0223 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-00-516-0223 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. 3120-00-516-0223 is rated as class 65 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-516-0223 is not classified as a special type of cargo when transported by water. 3120-00-516-0223 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-516-0223
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3120-00-516-0223 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: