Premium Information is available for this item - Upgrade for $1 a day
3120-00-495-7382
Thrust Washer Bearing
3120004957382 004957382 TT2402 T2402
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
May 2023
11
Marketplace 3120-00-495-7382
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-495-7382 5+ Documents (More...)
Wahidullah Ahmadzai Ltd Frequently Asked Questions (FAQ) for CAGE T2402 What is CAGE Code T2402?
San.Tic.Ltd.Sti. located at Hunat Hatun Caddesi 8/A, Kayseri, 38000, Turkey.Who is CAGE Code T2402?
NumberManufacturerStatusQT.4007 U2663 - Qualtec (Obsolete) Primary Buy RNCC 3 RNVC 2 DAC 2 CVT 12/3 T2402
S4862 - Makino Milling Machine Company (Replaced) Related Standard RNCC 2 RNVC 1 DAC 3 15EC130C401 T2402
S4862 - Makino Milling Machine Company (Replaced) Related Standard RNCC 2 RNVC 1 DAC 3 20EC090A401 T2402
S4862 - Makino Milling Machine Company (Replaced) Related Standard RNCC 2 RNVC 1 DAC 3 20EC090A403 T2402
Restrictions 3120-00-495-7382
3120-00-495-7382 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-495-7382
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-495-7382
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- NASA (G070)
- Effective Date:
- 1 Apr 1991
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKEHD
- Poland (WP01)
- Effective Date:
- 1 Sep 2006
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3120-00-495-7382
- Part Number
- Manufacturer
- Status
- TT2402
- Manufacturer
- 70901 - Beemer Precision Inc (Active)
- Primary Buy
- Primary Buy
- TT2402
- 70417 - Chrysler Corp (Active)
- Primary Buy
- Primary Buy
- TT2402
- 12204 - Chrysler Realty Company Llc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- T2402
- 70417 - Chrysler Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 3120-00-495-7382
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square All Corners
- Cross-Sectional Shape Style [AAGR]
- Rectangular
- Diameter [ABMZ]
- 1.5680 Inches Minimum And 1.5880 Inches Maximum
- Material [MATT]
- Copper Alloy Overall
- Outside Diameter [ABKV]
- 2.4225 Inches Minimum And 2.4525 Inches Maximum
- Lubrication Material [ADZG]
- Lubricant, Manufacturers Standard
- Material Document And Classification [MDCL]
- Mil-B-5687,Ty 1,Comp A Mil Spec Single Material Response Overall
- Overall Thickness [ADUM]
- 0.1225 Inches Minimum And 0.1275 Inches Maximum
- Style Designator [STYL]
- Round
Weapon Systems (WSDC) 3120-00-495-7382
DLA Procurement Analysis 3120-00-495-7382
- Last Stock Position:
- 124 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3120-00-495-7382
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-495-7382
Freight Information 3120-00-495-7382
3120-00-495-7382 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-00-495-7382 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-00-495-7382 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-495-7382 is not classified as a special type of cargo when transported by water. 3120-00-495-7382 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-495-7382
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-00-495-7382 3 Records
Contracting Technical Data File (CTDF) 3120-00-495-7382 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: