3120-00-489-6356

5975-17-040-0481 5975170400481 170400481 is an enclosure generally fabricated of sheet material designed to accommodate (but does not include) electrical/electronic equipment so that the equipment may be operated without removal. it may include wires, cables, terminal boards, connectors, etc., required for equipment operation. for items designed to accommodate equipment mounted on panels, see rack, electrical equipment. see also case (2) (as modified). excludes interconnecting box; interconnecting cabinet; junction box; and terminal box.

5830-21-040-0481 5830210400481 210400481

5935-01-040-0481 5935010400481 010400481 is an electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), printed wiring board, or the like for convenience in joining with another electrical connector(s) or printed wiring board. it is designed to be mounted on a bulkhead, chassis, panel, wall, printed wiring board, or the like. excludes lampholder; jack, telephone; jack, tip; insert electrical connector; insert module, electrical connector; connector body (as modified) and socket, plug-in electronic components. see also wiring harness (as modified) and cable assembly (as modified). for items with termination wires of more than four inches in length, see lead assembly, electrical. for items without inserts, see shell, electrical connector.

5310-14-040-0481 5310140400481 140400481 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5340-34-040-0481 5340340400481 340400481 is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. includes straight flexible items. for items specifically designed to clamp a hose to a connection to prevent leakage, see clamp, hose. see also hanger, pipe and clip, spring tension. for retaining straps with a bridge, see strap, retaining. excludes clamp, electrical; band, retaining; clamp (1), c; bracket pipe.