Premium Information is available for this item - Upgrade for $1 a day
3120-00-478-2743
Sleeve Bearing
3120004782743 004782743 2578730-001A 2578730
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
7
Marketplace 3120-00-478-2743
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-478-2743 5+ Documents (More...)
Sleeve Bearing 3120004782743 004782743 : 1 28 Jun 1971 5325-00-478-2745 Retaining Ring https//www.nsnlookup.com
Sleeve Bearing 2578730-001ARNCC: C | RNVC: 1 | DAC: 5 28 Jun 1971 5325-00-478-2745 Retaining Ring
Sleeve Bearing 2578730-001ARNCC: 5 | RNVC: 9 | DAC: 1 28 Jun 1971 5325-00-478-2745 Retaining Ring
Restrictions 3120-00-478-2743
3120-00-478-2743 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3120-00-478-2743
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-478-2743
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
Approved Sources 3120-00-478-2743
- Part Number
- Manufacturer
- Status
- 2578730-001A
- Manufacturer
- 13002 - Goodrich Corporation (Active)
- Original Design
- Original Design
- 2578730-001A
- 55284 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 2578730-001A
- 17576 - Goodrich Corp (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 2578730-001A
- 6K4C8 - Goodrich Corporation (Active)
- Advisory Reference
- Advisory Reference
- 2578730-001A
- 06848 - Honeywell International Inc. (Active)
- Advisory Reference
- Advisory Reference
- 2578730
- 06848 - Honeywell International Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3120-00-478-2743
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.6880 Inches Minimum And 0.6890 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.8135 Inches Minimum And 0.8140 Inches Maximum
- Corner Shape [BZLX]
- Chamfered Inside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 1.0600 Inches Nominal
- Flange Width [AGFF]
- 0.0480 Inches Minimum And 0.0500 Inches Maximum
- Material Document And Classification [MDCL]
- Q-A-200/11 Fed Spec 1St Material Response Outer Layer Or Qq-A-225/9 Fed Spec 2Nd Material Response Outer Layer
- Material [MATT]
- Aluminum Alloy 7075 Outer Layer
- Material [MATT]
- Plastic Polytetrafluoroethylene Inner Layer
- Overall Length [ABHP]
- 0.3080 Inches Minimum And 0.3100 Inches Maximum
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 125.0 Microinches Left End Surface Of Body And Flange
- Surface Finish [CSYM]
- 125.0 Microinches Outside Diameter Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Outside Diameter Surface Of Flange
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Body And Flange
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response Outside Diameter Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response Outside Diameter Surface Of Flange
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response Left End Surface Of Body And Flange
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response Right End Surface Of Body
- Surface Treatment Document And Classification [STDC]
- Mil-A-8625,Type 2,Class 1 Mil Spec Single Treatment Response Right End Surface Of Body And Flange
- Surface Treatment [SFTT]
- Anodize Left End Surface Of Body And Flange
- Surface Treatment [SFTT]
- Anodize Outside Diameter Surface Of Flange
- Surface Treatment [SFTT]
- Anodize Outside Diameter Surface Of Body
- Surface Treatment [SFTT]
- Anodize Right End Surface Of Body
- Surface Treatment [SFTT]
- Anodize Right End Surface Of Body And Flange
- Test Data Document [TEST]
- 81349-Mil-I-6866 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 3120-00-478-2743
Management Data 3120-00-478-2743
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-478-2743
Freight Information 3120-00-478-2743
3120-00-478-2743 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-00-478-2743 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-00-478-2743 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-478-2743 is not classified as a special type of cargo when transported by water. 3120-00-478-2743 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-478-2743
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-DTL-17667, Neutral Wrapping Paper
- --
- --
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3120-00-478-2743 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: