Premium Information is available for this item - Upgrade for $1 a day
3120-00-450-6256
Sleeve Bearing
3120004506256 004506256 06-221-08-13 AT08SS13 32PB08C13 BJ16TC20M13 STSKJ001-08C013 101-2008-013 KJN08C013-140
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
7
Marketplace 3120-00-450-6256
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-450-6256 5+ Documents (More...)
/fsg-31/fsc-3120/us
https//www.nsnlookup.com /cage Roller Bearing Co Of America Inc (CAGE Code 73134) 19 Dec 1969 3120-00-450-6256
https//www.nsnlookup.com /cage Sargent Aerospace & Defense, Llc (CAGE Code 97613) Dec 1969 3120-00-450-6256
Restrictions 3120-00-450-6256
3120-00-450-6256 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-450-6256
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-450-6256
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3120-00-450-6256
- Part Number
- Manufacturer
- Status
- 06-221-08-13
- Manufacturer
- 09455 - Rbc Transport Dynamics Corp (Active)
- Primary Buy
- Primary Buy
- AT08SS13
- 15860 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- 32PB08C13
- 73134 - Roller Bearing Co Of America Inc (Active)
- Primary Buy
- Primary Buy
- BJ16TC20M13
- 3NPS1 - Rbc Aircraft Products, Inc. (Active)
- Primary Buy
- Primary Buy
- 101-2008-013
- 77896 - Rexnord Industries, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BJ16TC20M13
- 21335 - Timken Co (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- KJN08C013-140
- 97613 - Sargent Aerospace & Defense, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- STSKJ001-08C013
- 98897 - Lockheed Martin Corp (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3120-00-450-6256
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.5010 Inches Nominal
- Body Outside Diameter [ADAR]
- 0.6260 Inches Minimum And 0.6265 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Hardness Rating [CQFM]
- 27.0 Rockwell C Minimum Outer Layer And 32.0 Rockwell C Maximum Outer Layer
- Material [MATT]
- Plastic Tetrafluoroethylene Inner Layer
- Material [MATT]
- Steel Comp 630 Outer Layer
- Material Document And Classification [MDCL]
- Ams 5643 Assn Std Single Material Response Outer Layer
- Overall Length [ABHP]
- 0.4010 Inches Nominal
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges
- Surface Finish [CSYM]
- 125.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Left End Surface Of Body
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
DLA Procurement Analysis 3120-00-450-6256
Management Data 3120-00-450-6256
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- UC
- C-5A GALAXY
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-450-6256
Freight Information 3120-00-450-6256
3120-00-450-6256 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-00-450-6256 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3120-00-450-6256 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-00-450-6256 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-450-6256 is not classified as a special type of cargo when transported by water. 3120-00-450-6256 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-00-450-6256 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: