Premium Information is available for this item - Upgrade for $1 a day

3120-00-440-8463

Sleeve Bearing

3120004408463 004408463 8S6511 5CA451 8S6509 8S6511-00

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing

3120-00-440-8463 BEARING,SLEEVE 3120004408463 004408463

Managed by United States
NSN Created on 3 Dec 1969
Data Last Changed
November 2023
NATO Update Count
43
NATO Data Quality
3120-00-440-8463 BEARING,SLEEVE 3120004408463 004408463 1/1
3120-00-440-8463 Photo 1/1

3120-00-440-8463 Stock and Availability Marketplace 3120-00-440-8463

Need Help?
Request a Quotation from participating marketplace vendors

3120-00-440-8463 Related Documents Related Documents 3120-00-440-8463 4+ Documents (More...)

5 9 Feb 1972 3120-00-440-8440 Sleeve Bearing 9S1160-00RNCC: 5 | RNVC: 9 | DAC: 5 3 Dec 1969 3120-00-440-8463
Sleeve Bearing 8S6511 Restrictions 3120-00-440-8440 DEMIL: A | DEMILI : | CRITICALITY : | HMIC
5 9 Feb 1972 3120-00-440-8440 Sleeve Bearing 9S1160-00RNCC: 5 | RNVC: 9 | DAC: 5 3 Dec 1969 3120-00-440-8463
Sleeve Bearing 8S6511-00RNCC: 5 | RNVC: 9 | DAC: 5 3 Dec 1969 5330-00-440-9791 Gasket 8S6410-00RNCC
RNVC: 2 | DAC: 2 9 Feb 1972 5365-00-432-8183 Ring 8S7762RNCC: 5 | RNVC: 2 | DAC: 2 5 May 1971 3120-00-440-8463
2815-01-580-4110 2815015804110 015804110 is a device designed to maintain oil pressure within the moving parts of an internal combustion engine. may contain parts such as shaft, gears, pin, bushing, screen, adjusting screw and the like.

3120-00-440-8463 Demil Restrictions 3120-00-440-8463

DEMIL: A | DEMILI: | CRITICALITY: X | HMIC: N | PMIC: A | EDC: | ADPEC:

3120-00-440-8463 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

3120-00-440-8463 HTS and ScheduleB Import and Export 3120-00-440-8463

3120-00-440-8463 End Users End Users 3120-00-440-8463

US Army (A919)
Effective Date:
1 Sep 2006
Former MOE Rule:
A180
Supplementary Receivers:
AZCL
US Coast Guard (C911)
Effective Date:
1 Sep 2006
Former MOE Rule:
C005
US Air Force (FGGG)
Effective Date:
1 Sep 2006
Former MOE Rule:
FGCX
US Marine Corps (MC41)
Effective Date:
1 Sep 2006
Former MOE Rule:
MC04
US Navy (N9BG)
Effective Date:
1 Sep 2006
Former MOE Rule:
N9GD
Supplementary Collaborators:
GTHD
Brazil (YA01)
Effective Date:
1 Dec 2003
Spain (YB01)
Effective Date:
1 Apr 1991
Columbia (YC01)
Effective Date:
1 Jul 2015
Kuwait (YK01)
Effective Date:
1 Jan 2015
Malaysia (YW01)
Effective Date:
1 Jan 1998
Belgium (ZB01)
Effective Date:
1 Apr 1991
New Zealand (ZE01)
Effective Date:
1 Apr 1997
France (ZF01)
Effective Date:
1 Apr 1991
Republic of Korea (ZH01)
Effective Date:
1 May 2015
Portugal (ZP01)
Effective Date:
1 Apr 1991
Greece (ZU01)
Effective Date:
1 Apr 2008
Turkey (ZW01)
Effective Date:
1 Nov 1998

3120-00-440-8463 Stock, Inventory and Procurement DLA Procurement Analysis 3120-00-440-8463

Last Stock Position:
58 In Stock
DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

3120-00-440-8463 Management Data Management Data 3120-00-440-8463

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
US Coast Guard (GP)
EA
Subscribe
1
Oct 2021
US Coast Guard (GP)
EA
Subscribe
1
Oct 2020
Department of the Air Force (DF)
EA
Subscribe
1
Oct 2019
Department of the Army (DA)
EA
Subscribe
1

Army Army

Materiel Category and Inventory Manager:
T
Industrial Supplies (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

Air Force Air Force

Fund:
SF
Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
Budget:
9
57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
Price Validation Code:
N
The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of ā€œLā€ or ā€œFā€, then it must be evaluated locally where purchased or fabricated.
Expendability
Recoverability
Repairability:
N
Expendable. Condemn at User. Stock Fund (except Munitions).

Navy Navy

Cognizance:
9B
Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg

Marine Corps Marine Corps

Stores Account:
1
Stock Fund Account Item
Combat Essentiality:
5
Critical Repair Part to a Combat Essential End Item
Echelon Management:
B2
Material Identification:
B
Consumable Repair Parts
Operational Test:
No Special Procedures

3120-00-440-8463 Related Items NATO Stock Numbers Related to 3120-00-440-8463

3120-00-440-8463 Freight Data Freight Information 3120-00-440-8463

3120-00-440-8463 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-00-440-8463 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-00-440-8463 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-440-8463 is not classified as a special type of cargo when transported by water. 3120-00-440-8463 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

3120-00-440-8463 Packaging Data Packaging Data 3120-00-440-8463

Responsible Activity
Packaging Data Source
Primary Inventory Control Activity (PICA)
--

Item Pack Level (Unpackaged)

Item Size
Item Weight
Characteristics
Weight/Dimensions Category
Fragility
Item Preservation
--
--
Bare Metal Item
Over 10lb
Less than 85G
Special Requirement

Unit Pack Level (Packaged)

Quantity per Pack
Unit Size
Unit Weight
Unit Cube
Preservation Method
Cleaning/Drying
1
--
--
--
--
Any Suitable Process
Preservation Material
Wrapping Material
Cushioning/Dunnage
Cushioning Thickness
Container
Special Marking
--
--
--
--
--
No special marking

Intermediate Pack Level

Quantity of Unit Packs
Container
ASTM - D5118, Fiberboard Box

3120-00-440-8463 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 3120-00-440-8463 October 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
F

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: