Premium Information is available for this item - Upgrade for $1 a day
3120-00-305-5386
Sleeve Bearing
3120003055386 003055386 01-466
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
9
Marketplace 3120-00-305-5386
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-305-5386 5+ Documents (More...)
5962-01-466-9500 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-305-5386
Sleeve Bearing 3120003055386 003055386,01-466 Documents 3120-00-305-5386 5+ Documents ( More... ) https
Request a Quotation from participating marketplace vendors Request Updated Every Day 5985-01-466-9620
RQST NE Related Documents 5985-01-466-9620 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-31
RQST NE Updated Every Day 5998-01-466-0597 RQST Updated Every Day 5998-01-466-0597 RQST NE Related Documents
5998-01-466-0597 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-305-5386
Request a Quotation from participating marketplace vendors Request Updated Every Day 5985-01-466-3077
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-305-5386 Sleeve Bearing 3120003055386 003055386,01
Request a Quotation from participating marketplace vendors Request Updated Every Day 5975-01-466-9321
/fsc-3120/us 3120-00-305-5386 Sleeve Bearing 3120003055386 003055386,01-466 01-466-9500 is a Digital
Restrictions 3120-00-305-5386
3120-00-305-5386 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-305-5386
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-305-5386
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3120-00-305-5386
- Part Number
- Manufacturer
- Status
- 01-466
- Manufacturer
- 45934 - Ontic Engineering & Manufacturing, (Active)
- Primary Buy
- Primary Buy
- 01-466
- 56705 - Donallco Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-00-305-5386
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Antirotation/Lubrication Type And Quantity [CTJM]
- 1 Slot
- Body Inside Diameter [ADAS]
- 0.5000 Inches Minimum And 0.5005 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.6850 Inches Minimum And 0.6855 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 1.2490 Inches Minimum And 1.2495 Inches Maximum
- Flange Width [AGFF]
- 0.2495 Inches Minimum And 0.2500 Inches Maximum
- Material [MATT]
- Copper Alloy Overall
- Lubricant Accommodation Style [AGKH]
- Grooved Open Both Ends
- Slot Length [ABGD]
- 0.0050 Inches Minimum First And 0.0150 Inches Maximum First
- Slot Width [ABGC]
- 0.0150 Inches Nominal First
- Overall Length [ABHP]
- 0.8700 Inches Minimum And 0.8800 Inches Maximum
- Surface Finish [CSYM]
- 100.0 Microinches Right End Surface Of Left Flange
- Surface Finish [CSYM]
- 100.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 20.0 Microinches Inner Layer
- Surface Finish [CSYM]
- 20.0 Microinches Outside Diameter Surface Of Body
- Surface Finish [CSYM]
- 40.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 8.0 Microinches Left End Surface Of Body And Flange
- Surface Groove Location And Quantity [CTMQ]
- 1 Internal
DLA Procurement Analysis 3120-00-305-5386
Management Data 3120-00-305-5386
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-305-5386
Freight Information 3120-00-305-5386
3120-00-305-5386 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3120-00-305-5386 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3120-00-305-5386 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-305-5386 is not classified as a special type of cargo when transported by water. 3120-00-305-5386 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-305-5386
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3120-00-305-5386 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: