Premium Information is available for this item - Upgrade for $1 a day
3120-00-293-6697
Thrust Washer Bearing
3120002936697 002936697 K4329SZD
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
May 2023
2
Marketplace 3120-00-293-6697
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-293-6697 2+ Documents (More...)
Restrictions 3120-00-293-6697
3120-00-293-6697 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-293-6697
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-293-6697
- US Air Force (FXGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FXCX
Approved Sources 3120-00-293-6697
- Part Number
- Manufacturer
- Status
- K4329SZD
- Manufacturer
- 42280 - Gardner Denver Nash Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-00-293-6697
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Keyway Depth [AGJM]
- 0.0830 Inches Minimum And 0.0880 Inches Maximum
- Center Hole Keyway Width [AGJT]
- 0.1266 Inches Minimum And 0.1366 Inches Maximum
- Center Hole Shape Style [ABMX]
- Round W/Keyway
- Counterbore Diameter [AAWY]
- 0.6300 Inches Minimum And 0.6400 Inches Maximum
- Counterbore Depth [AAWZ]
- 0.0312 Inches Nominal
- Cross-Sectional Shape Style [AAGR]
- Counterbored
- Diameter [ABMZ]
- 0.4900 Inches Minimum And 0.4910 Inches Maximum
- Hardness Rating [CQFM]
- 58.0 Rockwell C Minimum Overall And 61.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Overall
- Outside Diameter [ABKV]
- 0.8750 Inches Nominal
- Lubrication Material [ADZG]
- Lubricant, Manufacturers Standard
- Style Designator [STYL]
- Round
- Surface Condition [SFCD]
- Lapped
DLA Procurement Analysis 3120-00-293-6697
Management Data 3120-00-293-6697
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- JY
- MISCELLANEOUS AIRCRAFT ACCESSORIES AND SYSTEMS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-293-6697
Freight Information 3120-00-293-6697
3120-00-293-6697 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194160. A Sub NMFC of X. It has a NMFC Description of WASHER OR GASKETS, IRON OR STEEL,. 3120-00-293-6697 is rated as class 50 when transported by Less-Than Truckload (LTL) freight. 3120-00-293-6697 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 55210 which rates the freight between FCL and LCL. 3120-00-293-6697 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 596 for ocean manifesting and military sealift. 3120-00-293-6697 is not classified as a special type of cargo when transported by water. 3120-00-293-6697 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-00-293-6697 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: