Premium Information is available for this item - Upgrade for $1 a day
3120-00-288-5081
Sleeve Bearing
3120002885081 002885081 CALL E03200 KITH0501-1201-01 KITH H60MLQ30205
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
August 2023
20
Marketplace 3120-00-288-5081
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-288-5081 5+ Documents (More...)
Documents 3426-15-191-5410 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-288-5081
Sleeve Bearing 3120002885081 002885081,CALL $1 a day Upgrade your Account Upgrade 3120-00-288-5081Sleeve
/fsg-31/fsc-3120/us
Navy (DN)NAConsolidated With 3120-00-288-5081Defense Logistics Agency (DS)IAConsolidated With 3120-00-288-5081
/fsg-31/fsc-3120/us
Restrictions 3120-00-288-5081
3120-00-288-5081 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-288-5081
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-288-5081
- US Army (A919)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- AZ
- US Coast Guard (C911)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- C005
- US Air Force (FGGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2005
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3120-00-288-5081
- Part Number
- Manufacturer
- Status
- KITH0501-1201-01
- Manufacturer
- 03481 - Bfgoodrich Co The Aerospace Div (Obsolete)
- Original Design
- Original Design
- E03200
- 55880 - Trellex Morse Inc (Active)
- Secondary Buy
- Secondary Buy
- KITH
- 76528 - Moffitt Lucian Q Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- H60MLQ30205
- 76528 - Moffitt Lucian Q Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- H60MLQ30205
- 0BGH7 - Bfgoodrich Co The (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- CALL
- 75183 - Johnson Rubber Co The (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3120-00-288-5081
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 2.0060 Inches Minimum And 2.0120 Inches Maximum
- Body Outside Diameter [ADAR]
- 2.6240 Inches Minimum And 2.6270 Inches Maximum
- Corner Shape [BZLX]
- Square All Corners
- Hardness Rating [CQFM]
- 65.0 Shore Durometer A Minimum Inner Layer And 75.0 Shore Durometer A Maximum Inner Layer
- Material [MATT]
- Copper Alloy 922 Outer Layer
- Material [MATT]
- Rubber Synthetic Inner Layer
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Class
- Lubrication Material [ADZG]
- Water
- Lubricant Accommodation Style [AGKH]
- Grooved Open Both Ends
- Material Document And Classification [MDCL]
- Mil-B-16541 Mil Spec Single Material Response Outer Layer
- Overall Length [ABHP]
- 8.0000 Inches Nominal
- Style Designator [STYL]
- Solid, Plain, No Outside Flanges
- Surface Groove Location And Quantity [CTMQ]
- 8 Internal
Weapon Systems (WSDC) 3120-00-288-5081
DLA Procurement Analysis 3120-00-288-5081
Management Data 3120-00-288-5081
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 1
- Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify serviceable or unserviceable items of a durable nature, which when unserviceable normally can be repaired economically by depots or lower echelons of maintenance.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3120-00-288-5081
Freight Information 3120-00-288-5081
3120-00-288-5081 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-00-288-5081 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. 3120-00-288-5081 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-288-5081 is not classified as a special type of cargo when transported by water. 3120-00-288-5081 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-288-5081
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 3120-00-288-5081 1 Records
Contracting Technical Data File (CTDF) 3120-00-288-5081 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: