Premium Information is available for this item - Upgrade for $1 a day
3120-00-288-2976
Sleeve Bearing
3120002882976 002882976 P70250-2
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
May 2023
12
Marketplace 3120-00-288-2976
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-288-2976 3+ Documents (More...)
Sleeve Bearing 3120002882976 002882976 Upgrade for $1 a day Upgrade your Account Upgrade 3120-00
-288-2976Sleeve Bearing3120002882976 002882976 P70250 P70250-2 BEARING,SLEEVE 91 EA NS Request Quotation
Sleeve Bearing 3120002882976 002882976 3120-00-288-2976 3120002882976 002882976 is a tubular shaped
Sleeve Bearing 3120002882976 002882976 3120-00-288-2976 3120002882976 002882976 is a tubular shaped
Restrictions 3120-00-288-2976
3120-00-288-2976 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-288-2976
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-288-2976
- US Air Force (FXGG)
- Effective Date:
- 1 Jul 2006
- Former MOE Rule:
- FXCX
Approved Sources 3120-00-288-2976
- Part Number
- Manufacturer
- Status
- P70250-2
- Manufacturer
- 06848 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3120-00-288-2976
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Body Inside Diameter [ADAS]
- 0.4030 Inches Minimum And 0.4090 Inches Maximum
- Body Outside Diameter [ADAR]
- 0.5070 Inches Minimum And 0.5090 Inches Maximum
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Inside Left Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Corner Shape [BZLX]
- Square Left Flange Body Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Right Corner
- Flange Outside Diameter [AEPR]
- 0.8650 Inches Minimum And 0.8850 Inches Maximum
- Flange Width [AGFF]
- 0.0590 Inches Minimum And 0.0650 Inches Maximum
- Hardness Rating [CQFM]
- 26.0 Rockwell C Minimum Overall And 32.0 Rockwell C Maximum Overall
- Material [MATT]
- Steel Overall
- Overall Length [ABHP]
- 0.4060 Inches Nominal
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 100.0 Microinches Left End Surface Of Body And Flange
- Surface Finish [CSYM]
- 100.0 Microinches Right End Surface Of Left Flange
- Surface Finish [CSYM]
- 100.0 Microinches Outside Diameter Surface Of Body
- Surface Finish [CSYM]
- 100.0 Microinches Outside Diameter Surface Of Flange
- Surface Finish [CSYM]
- 100.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 150.0 Microinches Inside Diameter Surface Of Body
- Surface Treatment [SFTT]
- Cadmium Overall
DLA Procurement Analysis 3120-00-288-2976
Management Data 3120-00-288-2976
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LA
- AIRCRAFT ENGINE FUEL AND ELECTRICAL
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3120-00-288-2976
Freight Information 3120-00-288-2976
3120-00-288-2976 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114850. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING O/T BALL/ROLLER I/S. 3120-00-288-2976 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58880 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-288-2976 is not classified as a special type of cargo when transported by water. 3120-00-288-2976 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3120-00-288-2976 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: