3120-00-223-8851

Sleeve Bearing

3120002238851 002238851 657D970-008 657D970PC8

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing

Managed by United States

NSN Created on 25 Mar 1970

Data Last Changed
November 2023

NATO Update Count
5

NATO Data Quality

3120-00-223-8851 BEARING,SLEEVE 3120002238851 002238851 1/1 — NSN 3120-00-223-8851 (Generic Image) 1/1

Marketplace 3120-00-223-8851

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

3120-00-223-8851 RQST NE

Updated Every Day

3120-00-223-8851 RQST

Updated Every Day

3120-00-223-8851 RQST NE

Related Documents 3120-00-223-8851 2+ Documents (More...)

https//www.nsnlookup.com
/fsg-30/fsc-3040/us

3040-00-555-9165 Shouldered Shaft 3040005559165 005559165

3040-00-555-9165 3040005559165 005559165 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

https//www.nsnlookup.com
/cage

General Electric Company (CAGE Code 01289)

Ring 544L337PC31RNCC: 3 | RNVC: 2 | DAC: 5PL544L337PC31RNCC: 5 | RNVC: 2 | DAC: 1 17 Jan 1968 3120-00-223-8851

Restrictions 3120-00-223-8851

3120-00-223-8851 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.

Approved Sources 3120-00-223-8851

Part Number
Manufacturer
Status
657D970-008: 01289 - General Electric Company (Active); Primary Buy; RNCC 3 RNVC 2 DAC 1
657D970PC8: 01289 - General Electric Company (Active); Secondary Buy; RNCC 5 RNVC 2 DAC 1

NATO Stock Numbers Related to 3120-00-223-8851

3120-99-244-0880 3120-12-156-2013 3120-12-159-1090 3120-12-363-9974 3120-99-282-2334 3120-12-166-5617 3120-14-360-7811 3120-12-388-6744 3120-99-757-0663 3120-14-496-7090 3120-14-569-1090 3120-21-694-0144 3120-99-203-0195 3120-12-155-1710 3120-12-199-1763 3120-12-190-4841 3120-12-360-5917 3120-12-329-2007