Premium Information is available for this item - Upgrade for $1 a day
3120-00-153-7661
Thrust Washer Bearing
3120001537661 001537661 101399 07-811H167 07-101399 811H167
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also WASHER, FLAT and SPACER, SLEEVE. View more Thrust Washer Bearing
August 2023
15
Marketplace 3120-00-153-7661
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-153-7661 5+ Documents (More...)
Thrust Washer Bearing 3120001537661 001537661 $1 a day Upgrade your Account Upgrade 3120-00-153
-7661Thrust Washer Bearing3120001537661 001537661 101399 07-811H167 07-101399 811H167 An item of any
124870-001 S1889PC8 101399 An item specifically designed to admit, protect and seal conductor groups
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-153-7661 Thrust Washer Bearing 3120001537661 001537661
Thrust Washer Bearing 3120001537661 001537661 3120-00-153-7661 3120001537661 001537661 is an item
124870-001 S1889PC8 101399 An item specifically designed to admit, protect and seal conductor groups
how to enable JavaScript in your web browser . 5365-34-030-7631Plate Spacer5365340307631 340307631 101399
Restrictions 3120-00-153-7661
3120-00-153-7661 is a Thrust Washer Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-153-7661
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-153-7661
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
- US Marine Corps (MC41)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- MC04
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Aug 2000
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3120-00-153-7661
- Part Number
- Manufacturer
- Status
- 101399
- Manufacturer
- 77237 - Dana Off Highway Products, Llc (Active)
- Primary Buy
- Primary Buy
- 07-101399
- 66654 - Tvh Parts Co. (Active)
- Secondary Buy
- Secondary Buy
- 07-811H167
- 66654 - Tvh Parts Co. (Active)
- Secondary Buy
- Secondary Buy
- 07-101399
- 16662 - Lift Parts Mfg Co Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 07-811H167
- 16662 - Lift Parts Mfg Co Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 811H167
- 12603 - Clark Equipment Co (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-00-153-7661
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Center Hole Shape Style [ABMX]
- Round
- Corner Shape [BZLX]
- Square First Inside Corner
- Corner Shape [BZLX]
- Square Second Inside Corner
- Cross-Sectional Shape Style [AAGR]
- Convex
- Diameter [ABMZ]
- 1.0100 Inches Minimum And 1.0200 Inches Maximum
- Hardness Rating [CQFM]
- 62.0 Rockwell B Minimum Overall And 75.0 Rockwell B Maximum Overall
- Material [MATT]
- Copper Alloy 544 Overall
- Outside Diameter [ABKV]
- 2.3750 Inches Nominal
- Outside Spherical Radius [AGHS]
- 2.4985 Inches Minimum And 2.5025 Inches Maximum
- Inside Spherical Radius [AGHT]
- 2.4370 Inches Minimum And 2.4390 Inches Maximum
- Lubrication Feature [CTLM]
- Indentation Flat Bearing Surface
- Overall Thickness [ADUM]
- 0.0615 Inches Minimum And 0.0635 Inches Maximum
- Style Designator [STYL]
- Round
DLA Procurement Analysis 3120-00-153-7661
Management Data 3120-00-153-7661
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3120-00-153-7661
Freight Information 3120-00-153-7661
3120-00-153-7661 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 194120. A Sub NMFC of Z. It has a NMFC Description of WASHERS/GASKETS/PCKG DVCS NOI. 3120-00-153-7661 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 95100 which rates the freight between FCL and LCL. 3120-00-153-7661 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 581 for ocean manifesting and military sealift. 3120-00-153-7661 is not classified as a special type of cargo when transported by water. 3120-00-153-7661 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-153-7661
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 3120-00-153-7661 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: