Premium Information is available for this item - Upgrade for $1 a day
3120-00-072-6972
Sleeve Bearing
3120000726972 000726972 GJ215 A9007 F7274PC967
A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also BUSHING, SLEEVE; SPACER, SLEEVE; and WASHER (as modified). Excludes PIN, HOLLOW. View more Sleeve Bearing
August 2023
5
Marketplace 3120-00-072-6972
Request a Quotation from participating marketplace vendors
Related Documents 3120-00-072-6972 5+ Documents (More...)
A9007 BEARING,SLEEVE 1 EA NS Request Quotation Updated Every Day 3120-00-072-6972 RQST NE Updated Every
to reduce friction and A9007 BEARING,SLEEVE 1 EA NS Request Quotation Updated Every Day 3120-00-072-
5998015619096 6972 Sleeve Bearing 3120000726972 000726972,GJ215 9096Electronic Components Assembly5998015619096
015619096 https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-072-6972 Sleeve Bearing 3120000726972
www.nsnlookup.com /fsg-59/fsc-5998/us 5998-01-561-9077 Electronic Components Assembly 5998015619077 A9007
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-915-8292 Sleeve Bushing 3120009158292 009158292,A9007
121902937VG95211-ML-121902937 C79298-A9007 fsc-7050/de 7050-12-190-2937 121902937VG95211-ML-121902937
https//www.nsnlookup.com /fsg-31/fsc-3120/us 3120-00-072-6972 Sleeve Bearing 3120000726972 000726972
fsc-7050/de 7050 121902937VG95211-ML-121902937 C79298-A9007 fsc-7050/de 7050 https//www.nsnlookup.com
7050-12-190-2937Electronic Components Assembly7050121902937 121902937VG95211- ML-121902937 C79298-A9007
Restrictions 3120-00-072-6972
3120-00-072-6972 is a Sleeve Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3120-00-072-6972
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3120-00-072-6972
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTHD
- Malaysia (YW01)
- Effective Date:
- 1 Apr 2002
Approved Sources 3120-00-072-6972
- Part Number
- Manufacturer
- Status
- GJ215
- Manufacturer
- 16712 - Siemens Energy, Inc. (Active)
- Primary Buy
- Primary Buy
- A9007
- 16712 - Siemens Energy, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- F7274PC967
- 16712 - Siemens Energy, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3120-00-072-6972
- Characteristic
- Specifications
- FIIG
- Specifications
- A045A0
- Antirotation/Lubrication Type And Quantity [CTJM]
- 1 Hole
- Body Inside Diameter [ADAS]
- 3.0620 Inches Nominal
- Body Outside Diameter [ADAR]
- 3.5010 Inches Minimum And 3.5020 Inches Maximum
- Corner Shape [BZLX]
- Chamfered Inside Left Corner
- Corner Shape [BZLX]
- Relief Groove Left Flange Body Corner
- Corner Shape [BZLX]
- Chamfered Outside Right Corner
- Corner Shape [BZLX]
- Square Inside Right Corner
- Corner Shape [BZLX]
- Square Left Flange Outside Right Corner
- Corner Shape [BZLX]
- Square Outside Left Corner
- Flange Outside Diameter [AEPR]
- 4.0000 Inches Nominal
- Flange Width [AGFF]
- 0.2500 Inches Nominal
- Hole Diameter [AAUB]
- 0.5000 Inches Nominal First
- Material [MATT]
- Copper Alloy 862 Overall Or Copper Alloy 863 Overall
- Material Document And Classification [MDCL]
- Mil-B-16522,Cl 2 Mil Spec Single Material Response Overall
- Overall Length [ABHP]
- 4.2500 Inches Nominal
- Style Designator [STYL]
- Solid, External Flange One End
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Left Flange
- Surface Finish [CSYM]
- 125.0 Microinches Outside Diameter Surface Of Flange
- Surface Finish [CSYM]
- 125.0 Microinches Right End Surface Of Body
- Surface Finish [CSYM]
- 32.0 Microinches Inside Diameter Surface Of Body
- Surface Finish [CSYM]
- 63.0 Microinches Left End Surface Of Body And Flange
- Surface Finish [CSYM]
- 63.0 Microinches Outside Diameter Surface Of Body
DLA Procurement Analysis 3120-00-072-6972
Management Data 3120-00-072-6972
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3120-00-072-6972
Freight Information 3120-00-072-6972
3120-00-072-6972 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114870. A Sub NMFC of X. It has a NMFC Description of BEARING/BUSHING METAL. 3120-00-072-6972 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58890 which rates the freight between FCL and LCL. 3120-00-072-6972 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3120-00-072-6972 is not classified as a special type of cargo when transported by water. 3120-00-072-6972 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3120-00-072-6972
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-DTL-17667, Neutral Wrapping Paper
- --
- --
- --
- No special marking
- MIL-DTL-17667, Neutral Wrapping Paper
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3120-00-072-6972 4 Records
Contracting Technical Data File (CTDF) 3120-00-072-6972 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: