3120-15-105-3102

www.nsnlookup.com /fsg-53/fsc-5310/ca 5310-21-896-2510 https//www.nsnlookup.com /fsg-31/fsc-3120/it 3120-15-105-3102
Sleeve Bushing 3120151053102 151053102 Request a Quotation from participating marketplace vendors
Request Updated Every Day 3120-15-105-3102 RQST NE Updated Every Day 3120-15-105-3102 RQST Updated Every

5310-21-709-1510 5310217091510 217091510

5310-21-808-1510 5310218081510 218081510

5310-21-709-1510 5310217091510 217091510 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2006 2815-15-106-2519 Motore Coppa Olio 047.1555.0/20RNCC: 3 | RNVC: 2 | DAC: 1 30 May 1989 3120-15-105-3102