3120-14-520-4201
Sleeve Bushing
3120145204201 145204201 39991013
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
Managed by France
NSN Created on 17 May 2000
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 3120-14-520-4201
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3120-14-520-4201 2+ Documents (More...)
enable charging and/or battery status monitoring. https//www.nsnlookup.com /fsg-31/fsc-3120/fr 3120-14-520-4201
Sleeve Bushing 3120145204201 145204201 3120-14-520-4201 3120145204201 145204201 is a tubular shaped
Sleeve Bushing 3120145204201 145204201 3120-14-520-4201 3120145204201 145204201 is a tubular shaped
5310-01-024-7085 5310010247085 010247085 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 3120-14-520-4201
End Users 3120-14-520-4201
- France (ZF)
Approved Sources 3120-14-520-4201
- Part Number
- Manufacturer
- Status
- 39991013
- Manufacturer
- F9111 - Thales Avs France Sas (Active)
- Primary Buy
- Primary Buy
NATO Stock Numbers Related to 3120-14-520-4201
3120-37-512-8161 3120-33-115-8052 3120-22-125-9264 5365-12-380-0530 3120-99-500-2362 3120-99-776-5698 3120-33-206-3365 3120-14-369-6609 5365-14-556-7881 3120-21-914-2022 3120-21-901-0247 3120-99-659-5750 3120-21-892-0404 3120-99-603-1064 3120-99-421-2212 3120-13-113-2295 3120-99-556-2391 3120-66-135-3582