3120-14-227-8427
Sleeve Bushing
3120142278427 142278427 0000174047 174047
A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see BUSHING, NONMETALLIC. See also BEARING, SLEEVE; BUSHING, TAPERED; SPACER, SLEEVE; INSULATOR, BUSHING; and BUSHING, ELECTRICAL CONDUCTOR. Excludes BUSHING, DRILL, JIG. View more Sleeve Bushing
Managed by France
NSN Created on 1 Jan 1966
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 3120-14-227-8427
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3120-14-227-8427 3+ Documents (More...)
2835-99-785-8350 2835997858350 997858350 BOLT,COMPRESSOR ROT
5950-99-950-6303 5950999506303 999506303 is an item consisting of a partial turn as one or more turns of wire or other conductive material which constitutes one continuous untapped winding. it may be wound or formed in other than a circular manner and may be self-supporting, requiring no coil form. it is specifically designed to furnish inductive reactance in a circuit carrying radio frequency current ranging from 20 kilohertz (kilocycles) and above. it may include tuning devices, integral resistors and capacitors; however, excludes filter (as modified). the coil has only two electrical terminals. for items having tapped winding or more than one winding - see transformer, radio frequency. for coils wound on resistors, which are designed to be inserted in the circuit of a radio frequency stage to suppress high frequency parasitic oscillations, see suppressor, parasitic.
5310-01-597-8057 5310015978057 015978057 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 3120-14-227-8427
End Users 3120-14-227-8427
- France (ZF)
Approved Sources 3120-14-227-8427
- Part Number
- Manufacturer
- Status
- 0000174047
- Manufacturer
- F6573 - Arquus (Active)
- Primary Buy
- Primary Buy
- 0000174047
- F0727 - R.V.I. (Renault Vehicules (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 174047
- F0727 - R.V.I. (Renault Vehicules (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 3120-14-227-8427
3120-37-512-8161 3120-33-115-8052 3120-22-125-9264 5365-12-380-0530 3120-99-500-2362 3120-99-776-5698 3120-33-206-3365 3120-14-369-6609 5365-14-556-7881 3120-21-914-2022 3120-21-901-0247 3120-99-659-5750 3120-21-892-0404 3120-99-603-1064 3120-99-421-2212 3120-13-113-2295 3120-99-556-2391 3120-66-135-3582