3110-01-697-7047

ITEM 24RNCC: 5 | RNVC: 2 | DAC: 2 18 Jan 1967 3110-99-467-8136 Self-Aligning Roller Bearing 3110-01-697-7047

May 2010 5330-01-648-4210 Plain Encased Seal SF-16C CRRNCC: 3 | RNVC: 2 | DAC: 5 23 Sep 2015 3110-01-697-7047

4710-15-193-0941 4710151930941 151930941 is a bent hollow item, welded or seamless. it has a round, square or any other cross section, with a continuous periphery. it is primarily designed to convey fluids, gases and/or semisolids. excludes items of circular cross section which conform in dimensional characteristics to pipe, metallic; elbow, pipe; elbow, tube; bend, electrical conduit; bend, pipe, return; and bend, tube, return. for items with end fittings on one or both ends, see tube assembly, metal.

2590-99-667-6874 2590996676874 996676874 SIGNAL COLUMN

5310-15-145-0352 5310151450352 151450352 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.