Premium Information is available for this item - Upgrade for $1 a day
3110-01-571-9781
Duplex Ball Bearing
3110015719781 015719781 578R953H04
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
1
Marketplace 3110-01-571-9781
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-571-9781 1+ Documents (More...)
United States (US) 4. 3110-01-571-9781 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3110-01-571-9781 RQST NE Updated Every Day 3110-01-571-9781 RQST
Restrictions 3110-01-571-9781
3110-01-571-9781 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-571-9781
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-571-9781
- US Air Force (FUGG)
- Effective Date:
- 1 Feb 2009
Approved Sources 3110-01-571-9781
- Part Number
- Manufacturer
- Status
- 578R953H04
- Manufacturer
- 97942 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-571-9781
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- End Item Identification [AGAV]
- F-16 Aircraft
- Bearing Seal Type [AGYW]
- Contact
- Bore Diameter [ABXV]
- 0.4998 Inches Minimum And 0.5000 Inches Maximum
- Contact Angle [CTHY]
- 18.00 Degrees Nominal
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Ball
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Outer Ring
- Material [MATT]
- Plastic Polytetrafluoroethylene Spacer
- Material [MATT]
- Steel Comp 440C Ball
- Material [MATT]
- Steel Comp 440C Inner Ring
- Material [MATT]
- Steel Comp 440C Outer Ring
- Load Direction [AGZC]
- Angular
- Lubrication Material Document And Classification [LMDC]
- Royco 27 Grease.10-15 Percent Capacity Mfr Ref Single Material Response
- Lubrication Material [ADZG]
- Grease
- Seal Quantity [AGYJ]
- 2
- Overall Outside Diameter [ADGA]
- 0.7428 Inches Minimum And 0.7500 Inches Maximum
- Overall Width [ABMK]
- 0.3020 Inches Minimum And 0.3120 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Bearing,Ball,Annular,Angular Contact Duplex Pair,Face To Face
- Special Features [FEAT]
- Bearing Preload Pounds, Min 1,Max 5
- Standard Tolerance Designation [CTFZ]
- Abec No. 5P
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Face To Face Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-571-9781
Management Data 3110-01-571-9781
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3110-01-571-9781
Freight Information 3110-01-571-9781
3110-01-571-9781 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-571-9781 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-571-9781 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-571-9781 is not classified as a special type of cargo when transported by water. 3110-01-571-9781 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-571-9781 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: