Premium Information is available for this item - Upgrade for $1 a day
3110-01-530-9100
Annular Ball Bearing
3110015309100 015309100 SFR6SSWX26K4CG2 F332 SFR65PPDC37K25-66
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
May 2023
2
Marketplace 3110-01-530-9100
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-530-9100 5+ Documents (More...)
NE Updated Every Day 3110-01-530-9100 RQST Updated Every Day 3110-01-530-9100 RQST NE Related Documents
3110-01-530-9100 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3110/us 3110-01-530-9100
Annular Ball Bearing 3110015309100 015309100 United States (US) 4. 3110-01-530-9100 Marketplace
Restrictions Approved Sources Datasheet Management NE Updated Every Day 3110-01-530-9100 RQST Updated
132-7602Branched Electrical Special Purpose Cable Assembly5995661327602 661327602705/1/19417/000CX-F332
Alternating Current Motor 6105219006168,F332 900-6168 Alternating https//www.nsnlookup.com /fsg-84/fsc
132-7602Branched Electrical Special Purpose Cable Assembly5995661327602 661327602705/1/19417/000CX-F332
Alternating Current Motor 6105219006168,F332 900-6168 Alternating https//www.nsnlookup.com /fsg-84/fsc
which is designed for operation from an alternating current Alternating Current Motor 6105219006168,F332
Alternating Current Motor 6105219006168,F332 900-6168 Alternating Current Motor 6105219006168 https
Restrictions 3110-01-530-9100
3110-01-530-9100 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-530-9100
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-530-9100
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- Republic of Korea (ZH01)
- Effective Date:
- 1 May 2011
Approved Sources 3110-01-530-9100
- Part Number
- Manufacturer
- Status
- SFR6SSWX26K4CG2
- Manufacturer
- 70854 - Schaeffler Aerospace Usa Corp (Active)
- Primary Buy
- Primary Buy
- F332
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- SFR6SSWX26K4CG2
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- SFR65PPDC37K25-66
- 83086 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-530-9100
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- End Item Identification [AGAV]
- F-15 Eagle E Fwd Fuselag
- Bore Diameter [ABXV]
- 0.3748 Inches Minimum And 0.3750 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Flange Outside Diameter [AEPR]
- 0.9690 Inches Nominal
- Flange Width [AGFF]
- 0.0620 Inches Nominal
- Material [MATT]
- Steel Corrosion Resisting Inner Ring
- Material [MATT]
- Steel Corrosion Resisting Outer Ring
- Material [MATT]
- Steel Corrosion Resisting Retainer
- Outer Ring Outside Diameter [AGVV]
- 0.8748 Inches Minimum And 0.8750 Inches Maximum
- Load Direction [AGZC]
- Radial
- Retainer Fabrication Method [AGYF]
- Pressed
- Shield Quantity [AGYK]
- 2
- Overall Width [ABMK]
- 0.2800 Inches Minimum And 0.2812 Inches Maximum
- Special Features [FEAT]
- The Flange Has One Flat Side 0.877 In. From Outer Ring Od Opposite Flat
- Standard Tolerance Designation [CTFZ]
- Abec No.5
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-530-9100
Management Data 3110-01-530-9100
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3110-01-530-9100
Freight Information 3110-01-530-9100
3110-01-530-9100 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-530-9100 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-530-9100 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-530-9100 is not classified as a special type of cargo when transported by water. 3110-01-530-9100 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-530-9100 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- R
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: