Premium Information is available for this item - Upgrade for $1 a day
3110-01-471-6998
Airframe Ball Bearing
3110014716998 014716998 40-19371
A cylindrical item in which the inner or outer ring turns upon row(s) of hardened BALL, BEARING which roll on a raceway, thus minimizing friction. These items are characterized by their noncorrosive qualities, lightness of weight, inch dimensions rather than metric, inner rings generally projecting beyond the faces of the outer ring, or a very narrow width inner ring having an outside diameter slightly larger than the bore diameter. Designed primarily for use in aircraft assemblies, such as control systems and surfaces of aircraft. Excludes BEARING, BALL, ANNULAR. View more Airframe Ball Bearing
November 2023
3
Marketplace 3110-01-471-6998
Request a Quotation from participating marketplace vendors
Restrictions 3110-01-471-6998
3110-01-471-6998 is a Airframe Ball Bearing that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-471-6998
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-471-6998
- US Air Force (FUGG)
- Effective Date:
- 1 Nov 2009
- Former MOE Rule:
- FUU5
Approved Sources 3110-01-471-6998
- Part Number
- Manufacturer
- Status
- 40-19371
- Manufacturer
- 81982 - Hydro-Aire Aerospace Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-471-6998
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- End Item Identification [AGAV]
- B52 Sensor,Antilock Brake,Aircraft
- Alignment Type [AGZA]
- Self-Aligning
- Bore Diameter [ABXV]
- 0.1890 Inches Minimum And 0.1900 Inches Maximum
- Criticality Code Justification [CRTL]
- Abxv And Agvt And Agvu And Adga
- Material [MATT]
- Steel Ball
- Material [MATT]
- Steel Inner Ring
- Material [MATT]
- Steel Outer Ring
- Material [MATT]
- Steel Shield Or Steel Corrosion Resisting Shield
- Outer Ring Width [AGVT]
- 0.1980 Inches Minimum And 0.2030 Inches Maximum
- Inner Ring Width [AGVU]
- 0.2400 Inches Minimum And 0.2450 Inches Maximum
- Load Direction [AGZC]
- Radial
- Lubrication Material [ADZG]
- Grease
- Self-Alignment Location [AHAW]
- Internal
- Shield Quantity [AGYK]
- 2
- Overall Outside Diameter [ADGA]
- 0.6240 Inches Minimum And 0.6250 Inches Maximum
- Part Name Assigned By Controlling Agency [CXCY]
- Bearing
- Style Designator [STYL]
- Single Row Self Aligning Single Row Inner Ring Extended Both Sides
- Surface Treatment [SFTT]
- Cadmium All External/Exposed Metal Surfaces
- Surface Treatment [SFTT]
- Cadmium Shield
Weapon Systems (WSDC) 3110-01-471-6998
DLA Procurement Analysis 3110-01-471-6998
- Last Stock Position:
- 20 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3110-01-471-6998
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-471-6998
Freight Information 3110-01-471-6998
3110-01-471-6998 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-471-6998 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-471-6998 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-471-6998 is not classified as a special type of cargo when transported by water. 3110-01-471-6998 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-471-6998 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: