Premium Information is available for this item - Upgrade for $1 a day
3110-01-368-1764
Rod End Roller Bearing
3110013681764 013681764 MS21221-5L
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank. View more Rod End Roller Bearing
May 2023
3
Marketplace 3110-01-368-1764
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-368-1764 2+ Documents (More...)
Restrictions 3110-01-368-1764
3110-01-368-1764 is a Rod End Roller Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-368-1764
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-368-1764
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-368-1764
- Part Number
- Manufacturer
- Status
- MS21221-5L
- Manufacturer
- 96906 - Military Standards (Active)
- Definitive Standard
- Definitive Standard
Datasheet 3110-01-368-1764
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Self-Aligning
- Bearing Seal Type [AGYW]
- Contact
- Bore Diameter [ABXV]
- 0.3120 Inches Minimum And 0.3125 Inches Maximum
- Material [MATT]
- Steel Comp E52100 Inner Ringsteel Comp 4620 Rod End Bodysteel Comp E52100 Rollerrubber Butadiene-Acrylonitrile Class Nbr Sealsteel Comp 430 Shieldsteel Snap Ring
- Nominal Thread Size [CQJX]
- 0.500 Inches
- Outer Ring Width [AGVT]
- 0.4450 Inches Minimum And 0.4600 Inches Maximum
- Inner Ring Width [AGVU]
- 0.6820 Inches Minimum And 0.6870 Inches Maximum
- Length From Bore Center To Shank End [AGXH]
- 2.3750 Inches Nominal
- Lubrication Material [ADZG]
- Grease
- Seal Quantity [AGYJ]
- 2
- Self-Alignment Angle [CTLK]
- 10.00 Degrees Nominal
- Self-Alignment Location [AHAW]
- Internal
- Shank Thread Length [AGGY]
- 1.3400 Inches Nominal
- Shank Style [AAZF]
- Externally Threaded
- Shield Quantity [AGYK]
- 2
- Overall Length [ABHP]
- 3.1070 Inches Nominal
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment [SFTT]
- Cadmium Exposed Surfaces As Mounted
- Thread Direction [AAJF]
- Left-Hand
- Thread Class [AAJD]
- 3A
- Thread Quantity Per Inch [CMLP]
- 20
DLA Procurement Analysis 3110-01-368-1764
Management Data 3110-01-368-1764
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-368-1764
Freight Information 3110-01-368-1764
3110-01-368-1764 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114800. A Sub NMFC of X. It has a NMFC Description of BEARING,ROLLER,THRUST. 3110-01-368-1764 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58850 which rates the freight between FCL and LCL. 3110-01-368-1764 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-368-1764 is not classified as a special type of cargo when transported by water. 3110-01-368-1764 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-368-1764 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: