Premium Information is available for this item - Upgrade for $1 a day
3110-01-340-2153
Duplex Ball Bearing
3110013402153 013402153 MCZ7515LY23120PCT-DF6-10 MC-Z7TP515LY23120PCT-DF6-10 ST21900390
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
2
Marketplace 3110-01-340-2153
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-340-2153 4+ Documents (More...)
Duplex Ball Bearing 3110013402153 013402153 Documents ( More... ) https//www.nsnlookup.com /cage
-101RNCC: 3 | RNVC: 2 | DAC: 5 9 May 1991 3110-01-340-2153 Duplex Ball Bearing ST21900390RNCC: 5 | RNVC
Restrictions 3110-01-340-2153
3110-01-340-2153 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-340-2153
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-340-2153
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-340-2153
- Part Number
- Manufacturer
- Status
- MCZ7515LY23120PCT-DF6-10
- Manufacturer
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- MC-Z7TP515LY23120PCT-DF6-10
- 40920 - Mpb Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST21900390
- 81395 - Bae Systems Information And (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-01-340-2153
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Designation [AGZJ]
- Light
- Bearing Preload Rating [CTHQ]
- 6.0 Pounds Minimum And 10.0 Pounds Maximum
- Bearing Seal Type [AGYW]
- Contact
- Bore Diameter [ABXV]
- 0.7500 Inches Nominal
- Material [MATT]
- Steel Comp 440C Ballsteel Comp 440C Inner Ringsteel Corrosion Resisting Insertsteel Comp 440C Outer Ringplastic Phenolic Retainerrubber Synthetic Seal Or Plastic Polytetrafluoroethylene Seal
- Internal Clearance [AKVV]
- 0.0005 Inches Minimum Radial And 0.0015 Inches Maximum Radial
- Load Direction [AGZC]
- Angular
- Lubrication Material Document And Classification [LMDC]
- Mil-G-81322 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Retainer Fabrication Method [AGYF]
- Machined
- Seal Quantity [AGYJ]
- 2
- Overall Outside Diameter [ADGA]
- 1.1875 Inches Nominal
- Overall Width [ABMK]
- 0.5000 Inches Nominal
- Standard Tolerance Designation [CTFZ]
- Abec No. 7T
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Face To Face Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-340-2153
Management Data 3110-01-340-2153
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-340-2153
Freight Information 3110-01-340-2153
3110-01-340-2153 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-340-2153 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-340-2153 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-340-2153 is not classified as a special type of cargo when transported by water. 3110-01-340-2153 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-340-2153 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: