Premium Information is available for this item - Upgrade for $1 a day
3110-01-322-7361
Duplex Ball Bearing
3110013227361 013227361 6499-354142-1
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
3
Marketplace 3110-01-322-7361
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-322-7361 3+ Documents (More...)
United States (US) 4. 3110-01-322-7361 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3110-01-322-7361 RQST NE Updated Every Day 3110-01-322-7361 RQST
/fsg-59/fsc-5999/us
Duplex Ball Bearing 3110013227361 013227361 day Upgrade your Account Upgrade 3110-01-322-7361Duplex
Ball Bearing3110013227361 013227361 6499-354142 5999011027857 011027857,354142,717-175 Related Documents
Duplex Ball Bearing 3110013227361 013227361 day Upgrade your Account Upgrade 3110-01-322-7361Duplex
Ball Bearing3110013227361 013227361 6499-354142 day Upgrade your Account Upgrade 3110-01-322-7361Duplex
Restrictions 3110-01-322-7361
3110-01-322-7361 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-322-7361
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-322-7361
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-322-7361
- Part Number
- Manufacturer
- Status
- 6499-354142-1
- Manufacturer
- 04614 - Textron Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 6499-354142-1
- 80070 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-01-322-7361
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Rating [CTHQ]
- 15.0 Pounds Minimum And 25.0 Pounds Maximum
- Bore Diameter [ABXV]
- 4.0000 Inches Nominal
- Contact Angle [CTHY]
- 27.0 Degrees Minimum And 33.0 Degrees Maximum
- Material Document And Classification [MDCL]
- Mil-R-25988,Type 1,Class 1 Mil Spec Single Material Response Shield
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Ball
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Alignment Ring
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Outer Ring
- Material [MATT]
- Rubber Fluorosilicone Class Fq Shield And Plastic Phenolic Shield Or Rubber Fluorosilicone Class Fq Shield And Steel Corrosion Resisting Shield
- Load Direction [AGZC]
- Angular
- Lubrication Material Document And Classification [LMDC]
- Fn 2,Cagec 80070 Mfr Ref Single Material Response
- Lubrication Material [ADZG]
- Grease
- Retainer Fabrication Method [AGYF]
- Machined
- Shield Quantity [AGYK]
- 2
- Overall Outside Diameter [ADGA]
- 4.6250 Inches Nominal
- Overall Width [ABMK]
- 0.6250 Inches Nominal
- Special Features [FEAT]
- If Phenolic Reinforcement Is Utilized,Varnish Exposed Surfaces With Mil-V-173 Varnish Ter Mil-T-152
- Standard Tolerance Designation [CTFZ]
- Abec No.5
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Face To Face Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-322-7361
Management Data 3110-01-322-7361
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3110-01-322-7361
Freight Information 3110-01-322-7361
3110-01-322-7361 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-322-7361 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-322-7361 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-322-7361 is not classified as a special type of cargo when transported by water. 3110-01-322-7361 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-322-7361 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: