Premium Information is available for this item - Upgrade for $1 a day
3110-01-319-5286
Duplex Ball Bearing
3110013195286 013195286 KD060FM4K TA096-112U 6499-304629-1
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
2
Marketplace 3110-01-319-5286
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-319-5286 4+ Documents (More...)
Duplex Ball Bearing 3110013195286 013195286 3110-01-319-5286 3110013195286 013195286 is two single
Duplex Ball Bearing 3110013195286 013195286 Documents ( More... ) https//www.nsnlookup.com /cage
Restrictions 3110-01-319-5286
3110-01-319-5286 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-319-5286
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-319-5286
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-319-5286
- Part Number
- Manufacturer
- Status
- KD060FM4K
- Manufacturer
- 32828 - Kaydon Corporation (Active)
- Primary Buy
- Primary Buy
- TA096-112U
- 78118 - Mpb Corporation (Active)
- Primary Buy
- Primary Buy
- 6499-304629-1
- 80070 - Lockheed Martin Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-01-319-5286
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bore Diameter [ABXV]
- 5.9996 Inches Minimum And 6.0000 Inches Maximum
- Contact Angle [CTHY]
- 27.0 Degrees Minimum And 33.0 Degrees Maximum
- Material [MATT]
- Steel Comp E52100 Overall
- Load Direction [AGZC]
- Angular
- Material Document And Classification [MDCL]
- Fed-Std-66 Fed Std Single Material Response Overall
- Overall Outside Diameter [ADGA]
- 6.9995 Inches Minimum And 7.0000 Inches Maximum
- Overall Width [ABMK]
- 0.9600 Inches Minimum And 0.9750 Inches Maximum
- Special Features [FEAT]
- Bearing Is Dipped In Oil; Retainer Is Formed Wire,Strip Or Segmented,Snap Over Type,Ball In Every Pocket
- Standard Tolerance Designation [CTFZ]
- Abec No.5
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Face To Face Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-319-5286
Management Data 3110-01-319-5286
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-319-5286
Freight Information 3110-01-319-5286
3110-01-319-5286 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-319-5286 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-319-5286 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-319-5286 is not classified as a special type of cargo when transported by water. 3110-01-319-5286 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-319-5286 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: