Premium Information is available for this item - Upgrade for $1 a day
3110-01-304-9587
Annular Ball Bearing
3110013049587 013049587 P81793-011-01 S3332FC-7-P28-LD
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
May 2023
2
Marketplace 3110-01-304-9587
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-304-9587 1+ Documents (More...)
Restrictions 3110-01-304-9587
3110-01-304-9587 is a Annular Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-304-9587
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-304-9587
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
Approved Sources 3110-01-304-9587
- Part Number
- Manufacturer
- Status
- S3332FC-7-P28-LD
- Manufacturer
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- P81793-011-01
- 18876 - Us Army Aviation And Missile Command (Active)
- Primary Buy
- Primary Buy
- S3332FC-7-P28-LD
- 31633 - Alinabal Holdings Corporation (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3110-01-304-9587
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Rigid
- Bore Diameter [ABXV]
- 0.0937 Inches Nominal
- Bore Shape [AGZD]
- Straight
- Flange Outside Diameter [AEPR]
- 0.2340 Inches Nominal
- Flange Width [AGFF]
- 0.0180 Inches Nominal
- Material [MATT]
- Steel Comp 440C Overall
- Outer Ring Outside Diameter [AGVV]
- 0.1875 Inches Nominal
- Internal Clearance [AKVV]
- 0.0002 Inches Minimum Radial And 0.0008 Inches Maximum Radial
- Load Direction [AGZC]
- Radial
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Overall
- Retainer Fabrication Method [AGYF]
- Pressed
- Overall Width [ABMK]
- 0.0625 Inches Nominal
- Special Features [FEAT]
- Dry Bearing
- Standard Tolerance Designation [CTFZ]
- Abec No. 7P
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-304-9587
Management Data 3110-01-304-9587
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-304-9587
Freight Information 3110-01-304-9587
3110-01-304-9587 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-304-9587 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-304-9587 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-304-9587 is not classified as a special type of cargo when transported by water. 3110-01-304-9587 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-304-9587 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: