Premium Information is available for this item - Upgrade for $1 a day
3110-01-281-6554
Needle Bearing Cam Follower
3110012816554 012816554 CCFH-3/4-S
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion. View more Needle Bearing Cam Follower
June 2023
2
Marketplace 3110-01-281-6554
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-281-6554 4+ Documents (More...)
Needle Bearing Cam Follower 3110012816554 3110-01-281-6554 3110012816554 012816554 is an assembly
Restrictions 3110-01-281-6554
3110-01-281-6554 is a Needle Bearing Cam Follower that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-281-6554
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-281-6554
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Supplementary Collaborators:
- GTHD
Approved Sources 3110-01-281-6554
- Part Number
- Manufacturer
- Status
- CCFH-3/4-S
- Manufacturer
- 92563 - Mcgill Manufacturing Company, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-281-6554
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Self-Aligning
- Bearing Seal Type [AGYW]
- Contact
- Features Provided [CBBL]
- Flush Lubrication Fitting
- Material [MATT]
- Rubber Synthetic Seal
- Material [MATT]
- Steel Stud
- Material [MATT]
- Steel End Plate
- Material [MATT]
- Steel Outer Ring
- Material [MATT]
- Steel Roller
- Nominal Thread Size [CQJX]
- 0.4375 Inches
- Outer Ring Width [AGVT]
- 0.4950 Inches Minimum And 0.5000 Inches Maximum
- Internal Fit-Up Designation [AGZH]
- Standard
- Lubrication Material [ADZG]
- Grease
- Seal Quantity [AGYJ]
- 2
- Self-Alignment Location [AHAW]
- External
- Overall Length [ABHP]
- 1.4062 Inches Nominal
- Overall Outside Diameter [ADGA]
- 0.7490 Inches Minimum And 0.7500 Inches Maximum
- Thread Series Designator [THSD]
- Unj
- Style Designator [STYL]
- Cam Follower
- Stud Diameter [AGRJ]
- 0.4375 Inches Minimum And 0.4386 Inches Maximum
- Stud Length [AGXF]
- 0.8750 Inches Nominal
- Surface Treatment [SFTT]
- Oxide Exposed Surfaces As Mounted
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 2A
- Thread Length [AASA]
- 0.3750 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 20
Weapon Systems (WSDC) 3110-01-281-6554
DLA Procurement Analysis 3110-01-281-6554
Management Data 3110-01-281-6554
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-01-281-6554
Freight Information 3110-01-281-6554
3110-01-281-6554 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-281-6554 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-281-6554 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-281-6554 is not classified as a special type of cargo when transported by water. 3110-01-281-6554 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-281-6554
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3110-01-281-6554 1 Records
Contracting Technical Data File (CTDF) 3110-01-281-6554 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: