Premium Information is available for this item - Upgrade for $1 a day
3110-01-211-7519
Rod End Roller Bearing
3110012117519 012117519 1292035-103
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank. View more Rod End Roller Bearing
May 2023
7
Marketplace 3110-01-211-7519
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-211-7519 4+ Documents (More...)
Rod End Roller Bearing 3110012117519 3110-01-211-7519 3110012117519 012117519 is a special single
Rod End Roller Bearing 3110012117519 https//www.nsnlookup.com /nato/nato-stock-numbers/inc Rod
Restrictions 3110-01-211-7519
3110-01-211-7519 is a Rod End Roller Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-211-7519
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-211-7519
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
Approved Sources 3110-01-211-7519
- Part Number
- Manufacturer
- Status
- 1292035-103
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- 1292035-103
- 17772 - Aero Engineering & Manufacturing (Active)
- Secondary Buy
- Secondary Buy
- 1292035-103
- 80378 - Triumph Aerostructures, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3110-01-211-7519
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Alignment Type [AGZA]
- Self-Aligning
- Bearing Seal Type [AGYW]
- Contact
- Bore Diameter [ABXV]
- 0.7500 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec Single Material Response Rod End Body
- Material [MATT]
- Copper Alloy Retainer
- Material [MATT]
- Rubber Butadiene-Acrylonitrile Class Nbr Seal
- Material [MATT]
- Steel Comp 4140 Outside Washers
- Material [MATT]
- Steel Comp 4140 Sleeve
- Material [MATT]
- Steel Comp E4340 Rod End Body
- Material [MATT]
- Steel Comp E52100 Inner Ring
- Material [MATT]
- Steel Comp E52100 Outer Ring
- Material [MATT]
- Steel Comp E52100 Roller
- Nominal Thread Size [CQJX]
- 0.750 Inches
- Outer Ring Width [AGVT]
- 0.8750 Inches Nominal
- Inner Ring Width [AGVU]
- 1.2500 Inches Nominal
- Internal Fit-Up Designation [AGZH]
- Standard
- Length From Bore Center To Shank End [AGXH]
- 4.5000 Inches Nominal
- Lubrication Material [ADZG]
- Grease
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Outside Washers
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Outer Ring
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Roller
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Sleeve
- Retainer Fabrication Method [AGYF]
- Machined
- Seal Quantity [AGYJ]
- 2
- Self-Alignment Angle [CTLK]
- 8.00 Degrees Nominal
- Self-Alignment Location [AHAW]
- Internal
- Shank Diameter [AAZE]
- 0.7500 Inches Nominal
- Shank Style [AAZF]
- Externally Threaded
- Shank Thread Length [AGGY]
- 2.5500 Inches Minimum And 2.5700 Inches Maximum
- Overall Length [ABHP]
- 5.7650 Inches Nominal
- Special Features [FEAT]
- Plating On Bearing Only
- Style Designator [STYL]
- Double Row, Concave Rollers
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 1,Class 2 Fed Spec Single Treatment Response All External/Exposed Metal Surfaces
- Surface Treatment [SFTT]
- Cadmium All External/Exposed Metal Surfaces
- Test Data Document [TEST]
- 36659-Lc+72-1076 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 16
Weapon Systems (WSDC) 3110-01-211-7519
DLA Procurement Analysis 3110-01-211-7519
Management Data 3110-01-211-7519
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-01-211-7519
Freight Information 3110-01-211-7519
3110-01-211-7519 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-211-7519 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-211-7519 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-211-7519 is not classified as a special type of cargo when transported by water. 3110-01-211-7519 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-211-7519
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-01-211-7519 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- G
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: