Premium Information is available for this item - Upgrade for $1 a day
3110-01-140-5802
Duplex Ball Bearing
3110011405802 011405802 268-12961-10
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
May 2023
3
Marketplace 3110-01-140-5802
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-140-5802 1+ Documents (More...)
United States (US) 4. 3110-01-140-5802 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 3110-01-140-5802 RQST Updated Every Day 3110-01-140-5802 RQST NE Related Documents
Restrictions 3110-01-140-5802
3110-01-140-5802 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-140-5802
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-140-5802
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- FGCX
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3110-01-140-5802
- Part Number
- Manufacturer
- Status
- 268-12961-10
- Manufacturer
- 09205 - Lockheed Martin Corp Electronics And (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-140-5802
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- End Item Identification [AGAV]
- Aime9e/J/P
- Bore Diameter [ABXV]
- 0.2498 Inches Minimum And 0.2499 Inches Maximum
- Features Provided [CBBL]
- Aligning Ring
- Material [MATT]
- Steel Comp 440A Overall
- Internal Clearance [AKVV]
- 0.0007 Inches Minimum Radial And 0.0010 Inches Maximum Radial
- Load Direction [AGZC]
- Radial
- Lubrication Material [ADZG]
- Grease
- Lubrication Material Document And Classification [LMDC]
- Mil-G-7711 Mil Spec Single Material Response
- Material Document And Classification [MDCL]
- Aisi Assn Std Single Material Response Overall
- Overall Outside Diameter [ADGA]
- 0.3749 Inches Nominal
- Overall Width [ABMK]
- 0.2000 Inches Minimum And 0.2100 Inches Maximum
- Special Features [FEAT]
- Flanged 0.0210 Min 0.0230 Max Wide W/Chamfer 0.0020 On Inside Corner
- Standard Tolerance Designation [CTFZ]
- Abec No.7
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Back To Back Mounting
- Surface Finish [AGYE]
- Unground
DLA Procurement Analysis 3110-01-140-5802
Management Data 3110-01-140-5802
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AB
- AIM-9 (SIDE WINDER)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3110-01-140-5802
Freight Information 3110-01-140-5802
3110-01-140-5802 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-140-5802 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3110-01-140-5802 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-140-5802 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-140-5802 is not classified as a special type of cargo when transported by water. 3110-01-140-5802 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-140-5802 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: