Premium Information is available for this item - Upgrade for $1 a day
3110-01-119-1130
Duplex Ball Bearing
3110011191130 011191130 3TAR6-10UDF2-4L0V-2 13025958
Two single row annular ball bearings selected dimensionally to be a matched pair or set. The ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. May include a single row angular contact bearing with faces specially ground for duplex mounting. View more Duplex Ball Bearing
June 2023
2
Marketplace 3110-01-119-1130
Request a Quotation from participating marketplace vendors
Restrictions 3110-01-119-1130
3110-01-119-1130 is a Duplex Ball Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-119-1130
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-119-1130
- US Army (A919)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- A180
- US Air Force (FGGG)
- Effective Date:
- 1 Feb 2005
Approved Sources 3110-01-119-1130
- Part Number
- Manufacturer
- Status
- 3TAR6-10UDF2-4L0V-2
- Manufacturer
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- 13025958
- 18876 - Us Army Aviation And Missile Command (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3110-01-119-1130
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Preload Designation [AGZJ]
- Light
- Bearing Preload Rating [CTHQ]
- 3.0 Pounds Nominal
- Bore Diameter [ABXV]
- 0.3750 Inches Nominal
- Material [MATT]
- Plastic Phenolic Retainer
- Material [MATT]
- Steel Comp 440C Ball
- Material [MATT]
- Steel Comp 440C Inner Ring
- Material [MATT]
- Steel Comp 440C Outer Ring
- Internal Clearance [AKVV]
- 0.0007 Inches Minimum Radial And 0.0012 Inches Maximum Radial
- Load Direction [AGZC]
- Angular
- Lubrication Material [ADZG]
- Lubricating Oil
- Lubrication Material Document And Classification [LMDC]
- Mil-L-6085 Mil Spec Single Material Response
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Ball
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Outer Ring
- Retainer Fabrication Method [AGYF]
- Machined
- Overall Outside Diameter [ADGA]
- 0.6250 Inches Nominal
- Overall Width [ABMK]
- 0.3120 Inches Nominal
- Special Features [FEAT]
- Retainer Impregnated With Specified Lubricant,Pair Of Bearings Ground For Universal Mtg
- Standard Tolerance Designation [CTFZ]
- Abec No. 5P
- Style Designator [STYL]
- Counterbored Outer Rings, Non-Separable, Face To Face Mounting
- Surface Finish [AGYE]
- Ground
DLA Procurement Analysis 3110-01-119-1130
Management Data 3110-01-119-1130
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3110-01-119-1130
Freight Information 3110-01-119-1130
3110-01-119-1130 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-119-1130 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-119-1130 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-119-1130 is not classified as a special type of cargo when transported by water. 3110-01-119-1130 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-119-1130
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-01-119-1130 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: