Premium Information is available for this item - Upgrade for $1 a day
3110-01-097-4976
Annular Ball Bearing
3110010974976 010974976 SSR-4HA7T58L01P SR4C7P58 R4MR5 738034-1 SR4K58 SR4 738034
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. For items with faces specially ground for duplex mounting see BEARING, BALL, DUPLEX. Excludes BEARING, BALL, AIRFRAME. View more Annular Ball Bearing
June 2023
27
Marketplace 3110-01-097-4976
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-097-4976 5+ Documents (More...)
Documents 3110-01-107-1264 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3110/us 3110-01-097-4976
Annular Ball Bearing 3110010974976 010974976 SR4 BEARING,BALL,ANNULAR 93 EA NS Request Quotation
RNVC 2 DAC 5 350435-001 22915 - Northrop Grumman Corp (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 1 SR4K58
Restrictions 3110-01-097-4976
3110-01-097-4976 is a Annular Ball Bearing that is an aviation critical safety item or flight safety critical aircraft part. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-097-4976
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-097-4976
- US Army (A919)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- A180
- Supplementary Receivers:
- CT
- MOE Rule:
- BGX1
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- BCX1
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- US Navy (N9BG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- GTKE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Oct 1997
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 May 2008
- Turkey (ZW01)
- Effective Date:
- 1 Dec 2005
Approved Sources 3110-01-097-4976
- Part Number
- Manufacturer
- Status
- 738034-1
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Source Control
- Source Control
- 738034-1
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Primary Buy
- Primary Buy
- 738034-1
- 40920 - Mpb Corp (Active)
- Primary Buy
- Primary Buy
- SSR-4HA7T58L01P
- 50294 - New Hampshire Ball Bearings Inc (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SR4C7P58
- 40920 - Mpb Corp (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
- SR4K58
- 83086 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SR4
- 83086 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 738034-1
- 83086 - New Hampshire Ball Bearings Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 738034
- 73030 - Hamilton Sundstrand Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- R4MR5
- 2H043 - General Motors Corp Ndh Aerospace (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 3110-01-097-4976
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bore Diameter [ABXV]
- 0.2498 Inches Minimum And 0.2500 Inches Maximum
- Bore Shape [AGZD]
- Straight
- Material [MATT]
- Steel Comp 440C Ball
- Material [MATT]
- Steel Comp 440C Inner Ring
- Material [MATT]
- Steel Comp 440C Outer Ring
- Material [MATT]
- Steel Comp 410 Retainer
- Internal Clearance [AKVV]
- 0.0005 Inches Minimum Radial And 0.0008 Inches Maximum Radial
- Load Direction [AGZC]
- Radial
- Lubrication Material [ADZG]
- Lubricant
- Lubrication Material Document And Classification [LMDC]
- Mil-B-197 Mil Spec Single Material Response
- Material Document And Classification [MDCL]
- Fed Std 66,Aisi 410/Sae 51410 Fed Std Single Material Response Retainer
- Material Document And Classification [MDCL]
- Fed Std 66,Aisi 440C Fed Std Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- Fed Std 66,Aisi 440C Fed Std Single Material Response Outer Ring
- Material Document And Classification [MDCL]
- Fed Std 66,Aisi 440C Fed Std Single Material Response Ball
- Retainer Fabrication Method [AGYF]
- Pressed
- Overall Outside Diameter [ADGA]
- 0.6248 Inches Minimum And 0.6250 Inches Maximum
- Overall Width [ABMK]
- 0.1950 Inches Minimum And 0.1960 Inches Maximum
- Special Features [FEAT]
- Stabilized For Operation From M65 Deg F To P250 Deg F,C56.0 To C64.0 Rockwell Hardness Rings And Balls
- Standard Tolerance Designation [CTFZ]
- Abec No.7
- Style Designator [STYL]
- Non-Loading Groove, Non-Separable
- Surface Finish [AGYE]
- Ground
- Test Data Document [TEST]
- 73030-738034-1 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
Weapon Systems (WSDC) 3110-01-097-4976
DLA Procurement Analysis 3110-01-097-4976
Management Data 3110-01-097-4976
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Air Force (DF)
- F
- R
- Refer To Aft095req
- AFT095REQ
- R
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-01-097-4976
Freight Information 3110-01-097-4976
3110-01-097-4976 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-097-4976 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. 3110-01-097-4976 is rated as class 77.5 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-097-4976 is not classified as a special type of cargo when transported by water. 3110-01-097-4976 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-097-4976
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Procurement History 3110-01-097-4976 1 Records
Contracting Technical Data File (CTDF) 3110-01-097-4976 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: