Premium Information is available for this item - Upgrade for $1 a day
3110-01-094-9309
Rod End Roller Bearing
3110010949309 010949309 215-70429-4
A special single or multiple-row roller bearing, rigid or self-aligning, and constructed with either inside threaded, plain hollow, maile threaded, or solid shank. View more Rod End Roller Bearing
June 2023
5
Marketplace 3110-01-094-9309
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-094-9309 3+ Documents (More...)
Rod End Roller Bearing 3110010949309 //www.nsnlookup.com /nato/nato-stock-numbers/inc Rod End Roller
Restrictions 3110-01-094-9309
3110-01-094-9309 is a Rod End Roller Bearing that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3110-01-094-9309
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-094-9309
- US Air Force (FGGG)
- Effective Date:
- 1 Sep 2006
- Former MOE Rule:
- FGCX
- Supplementary Collaborators:
- SX
- US Navy (N9BG)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 3110-01-094-9309
- Part Number
- Manufacturer
- Status
- 215-70429-4
- Manufacturer
- 80378 - Triumph Aerostructures, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-094-9309
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- End Item Identification [AGAV]
- A-7D Acft
- Alignment Type [AGZA]
- Rigid
- Bore Diameter [ABXV]
- 0.3743 Inches Minimum And 0.3747 Inches Maximum
- Features Provided [CBBL]
- External Lubrication Fitting And Lubrication Hole And Lubrication Groove
- Material [MATT]
- Steel Comp 4340 Rod End Body
- Material [MATT]
- Steel Comp E52100 Inner Ring
- Material [MATT]
- Steel Comp E52100 Retaining Plate
- Material [MATT]
- Steel Comp E52100 Roller
- Outer Ring Width [AGVT]
- 0.5570 Inches Minimum And 0.5620 Inches Maximum
- Inner Ring Width [AGVU]
- 0.4700 Inches Nominal
- Length From Bore Center To Shank End [AGXH]
- 3.2200 Inches Minimum And 3.2600 Inches Maximum
- Lubrication Material [ADZG]
- Grease
- Lubrication Material Document And Classification [LMDC]
- Mil-G-23827 Mil Spec Single Material Response Or 215-00613,A-7A,Fscm 800378 Mfr Ref Single Material Response Or 215-00613,A-7B Fscm 80378 Mfr Ref Single Material Response Or 216-00613,A-7D Fscm 80378 Mfr Ref Single Material Response Or 218-00613,A-7E,Fscm 80378 Mfr Ref Single Material Response
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Inner Ring
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Outer Ring
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Retaining Plate
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Roller
- Material Document And Classification [MDCL]
- Cva1-585,Cond C-1,Fscm 80378 Mfr Ref Single Material Response Rod End Body
- Shank Diameter [AAZE]
- 0.7480 Inches Minimum And 0.7490 Inches Maximum
- Shank Bore Depth [AGXK]
- 2.5000 Inches Nominal
- Shank Bore Diameter [AGXJ]
- 0.4375 Inches Nominal
- Shank Style [AAZF]
- Hollow
- Overall Length [ABHP]
- 3.8300 Inches Nominal
- Overall Outside Diameter [ADGA]
- 1.1800 Inches Nominal
- Special Features [FEAT]
- Plate Expose Surfaces Of Bearing As Mounted; Chromium Plate Rod End Body Below Housing,0.880 In.,All Others Cadmium Plates; Two 0.250 In. Dia Thru Rivet Holes In Shank,0.750 In. C To C,2.020 In. From Bore C To First Hole
- Style Designator [STYL]
- Single Row, Needle Roller
- Surface Treatment [SFTT]
- Cadmium Inner Ring
- Surface Treatment [SFTT]
- Cadmium Outer Ring
- Surface Treatment [SFTT]
- Cadmium Retaining Plate
- Surface Treatment [SFTT]
- Cadmium Rod End Body And Chromium Rod End Body
- Test Data Document [TEST]
- 81349-Mil-I-6868 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.). And 80378-Cva 13-23 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
DLA Procurement Analysis 3110-01-094-9309
Management Data 3110-01-094-9309
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3110-01-094-9309
Freight Information 3110-01-094-9309
3110-01-094-9309 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-094-9309 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-094-9309 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-094-9309 is not classified as a special type of cargo when transported by water. 3110-01-094-9309 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3110-01-094-9309
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --
Contracting Technical Data File (CTDF) 3110-01-094-9309 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: