Premium Information is available for this item - Upgrade for $1 a day
3110-01-043-7608
Needle Bearing Cam Follower
3110010437608 010437608 NAS562-4FEE5
An assembly consisting of a roller and stud used to effect a rolling contact with a cam, and convert the reciprocating or oscillating motion to linear motion. View more Needle Bearing Cam Follower
May 2023
5
Marketplace 3110-01-043-7608
Request a Quotation from participating marketplace vendors
Related Documents 3110-01-043-7608 1+ Documents (More...)
Documents 3110-01-043-7608 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-31/fsc-3110/us 3110
-01-043-7608 Needle Bearing Cam Follower 3110010437608 NAS562-4FEE5 An assembly consisting of a roller
Restrictions 3110-01-043-7608
3110-01-043-7608 is a Needle Bearing Cam Follower that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3110-01-043-7608
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3110-01-043-7608
- US Navy (N9BG)
- Effective Date:
- 1 Feb 2005
- Former MOE Rule:
- N9GD
- Supplementary Collaborators:
- KE
Approved Sources 3110-01-043-7608
- Part Number
- Manufacturer
- Status
- NAS562-4FEE5
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 3110-01-043-7608
- Characteristic
- Specifications
- FIIG
- Specifications
- A044A0
- Bearing Seal Type [AGYW]
- Contact
- Material [MATT]
- Plastic Polyamide Seal
- Material [MATT]
- Steel End Plate
- Material [MATT]
- Steel Comp E52100 Outer Ring
- Material [MATT]
- Steel Comp E52100 Roller
- Material [MATT]
- Steel Comp E52100 Stud
- Nominal Thread Size [CQJX]
- 0.250 Inches
- Outer Ring Width [AGVT]
- 0.2760 Inches Minimum And 0.2810 Inches Maximum
- Lubrication Material Document And Classification [LMDC]
- Mil-G-23827 Mil Spec Single Material Response
- Lubrication Material [ADZG]
- Grease
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Outer Ring
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Roller
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Stud
- Seal Quantity [AGYJ]
- 2
- Overall Length [ABHP]
- 0.9845 Inches Maximum
- Overall Outside Diameter [ADGA]
- 0.6870 Inches Minimum And 0.6885 Inches Maximum
- Special Features [FEAT]
- Means For Lubrication Installed In Flanged End May Extend 0.0500 In. Beyond Flange
- Specification/Standard Data [ZZZK]
- 80205-Nas 562 Professional/Industrial Association Standard
- Stud Length [AGXF]
- 0.6405 Inches Minimum And 0.6875 Inches Maximum
- Style Designator [STYL]
- Cam Follower
- Stud Diameter [AGRJ]
- 0.2485 Inches Minimum And 0.2500 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-C-320,Cl 2 Fed Spec Single Treatment Response Outer Ring Outside Diameter
- Surface Treatment Document And Classification [STDC]
- Qq-C-320,Cl 2 Fed Spec Single Treatment Response Roller
- Surface Treatment Document And Classification [STDC]
- Qq-C-320; Cl 2 Fed Spec Single Treatment Response Shield Side
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 1,Cl 2 Fed Spec Single Treatment Response All External/Exposed Metal Surfaces
- Surface Treatment [SFTT]
- Cadmium All External/Exposed Metal Surfaces
- Surface Treatment [SFTT]
- Chromium Outer Ring Outside Diameter
- Surface Treatment [SFTT]
- Chromium Shield Side
- Surface Treatment [SFTT]
- Chromium Roller
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.3440 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 28
- Thread Series Designator [THSD]
- Unjf
Weapon Systems (WSDC) 3110-01-043-7608
DLA Procurement Analysis 3110-01-043-7608
Management Data 3110-01-043-7608
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3110-01-043-7608
Freight Information 3110-01-043-7608
3110-01-043-7608 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 114820. A Sub NMFC of X. It has a NMFC Description of BEARINGS/BUSHINGS NOI BALL/ROLLER. 3110-01-043-7608 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 58860 which rates the freight between FCL and LCL. 3110-01-043-7608 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 742 for ocean manifesting and military sealift. 3110-01-043-7608 is not classified as a special type of cargo when transported by water. 3110-01-043-7608 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3110-01-043-7608 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: